APCLP09060E   APC   9x6 Electric Propeller

TECH NOTES
      This is one R/C Airplane 9x6E APC Thin-Electric Composite Propeller
                              by Landing Products.

FEATURES: APC props are manufactured using a pultrusion process. This method
            causes the fiberglass "fibers" to be oriented axially in 1/2" long
            pellets, allowing for a higher fiber (60%) to resin (nylon binder)
            density. Providing substantially higher strength and stiffness than
            glass filled nylon.
          The additional stiffness is beneficial to control of vibration
            resonance response.
          The higher strength allows the use of thinner cross-sections,
            beneficial to weight and aerodynamic efficiency.
          Competition proven.
          Dark gray composite material.

INCLUDES: One APC Thin-Electric Propeller

REQUIRES: ALL props require balancing (use TOPQ5700).
          May need prop reamer, use GPMQ5005 (SAE) or FOXQ1520 (metric).

SPECS:    Prop Diameter: 9"
          Prop Pitch:    6E"
          Hub Thickness: 0.40"
          Hub Diameter:  0.79"
          Weight:        0.035lbs
          Engine Shaft Diameter: N/A

COMMENTS: Not for the use with gas engines.