|
Associated |
Hobbies R Us |
Associated |
|
|
ASC30103 Factory Team TC5 Kit
TECH NOTES
This is the 1/10 scale electric powered, radio controlled, Associated TC5 Factory Team On-Road Touring Car Kit.
FEATURES: Chassis: Double deck 1/8" (2.5mm) thick woven carbon fiber with blue aluminum bulkheads for very rigid chassis assembly allowing easy tweaks for high grip carpet racing or low traction parking lot racing and all conditions in between Drive: Four wheel dual belt with adjustable diff heights and belt tension Motor Mount: Machined blue aluminum with integrated heat sink Ball Bearings: Full set of 20 Shocks: Four VCS2 oil-filled with coil-over springs, silicone shock bladders and hard anodized threaded bodies Shock Towers: 0.12" (3mm) thick woven carbon fiber Carbon Fiber: Front and rear shock towers battery strap, steering rack, and bellcranks Camber Link Mounts: Blue anodized aluminum Top Deck Standoffs: Blue anodized aluminum Arm Mounts: Blue anodized aluminum Hex Drive: 12mm, clamping, blue anodized aluminum Main Gear: Kimbrough 87 tooth, 48 pitch plastic construction Gearbox: Closed front and rear Differentials: Ball differential in the front and rear, composite with blue aluminum outdrive saver rings Bumpers: Foam front Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle Steering: Ball bearing supported, mono-bellcrank with integrated adjustable servo saver Ackerman: Adjustable, Ackerman describes the effect of the inner front wheel turning faster than the outer front wheel during turns Sway Bar: Front and rear Battery Strap: Woven carbon fiber
INCLUDES: TC5 rolling chassis with oil-filled threaded aluminum shocks, Carbon fiber chassis, shock towers, blue anodized aluminum parts, carbon fiber parts, blue screws, 20 ball bearings, Associated logo decal sheet, 87T 48 pitch Kimbrough spur gear, titanium blue anodized turnbuckles, illustrated manual and complete parts breakdown
REQUIRES: Radio: 2-channel Servo: 1-standard size Motor: 540 size stock or modified ESC: For the selected motor Battery: 6 cell side-by-side construction Tires: Touring car tires Wheels: Wheels that are the same width as the selected tires Charger: AC/DC timed or peak for 6-cell battery Body: 190mm touring car body Pinion: 48 pitch, number of teeth based on motor selection Misc. Items: Building and track equipment
SPECS: VEHICLE- Length: 14.6" (372mm) Front and Rear Track: 7.5" (190mm) distance between outer edges of tires Weight: 1.15lb (525g) Wheelbase: 10.2" (259mm) Internal Gear Ratio: 2.0
COMMENTS: For Replacement Ball Bearings use: Qty. Size Location Qty. Bearing Set 4 5x8mm Differential 1 DTXC1523 4 10x15mm Differential 1 DTXC1595 2 4x7mm Servo Saver 1 DTXC1507 2 8x4mm Spur Gear Shaft 1 DTXC1511 4 6x10mm Front Hubs 1 DTXC1561 4 6x10mm Rear Hubs 1 DTXC1561
Woven Carbon Fiber Parts Lower chassis Top deck, 2.5mm 2.5mm thick woven carbon fiber spine 3.0mm thick woven carbon fiber shock towers Carbon Parts Antenna mount Front and rear arms Servo mounts Steering block and hub carriers Aluminum Parts-all blue in color Motor bulkhead Camber link spacer, camber link (left side) Camber link spacer, camber link (right side) Standoffs Clamping hex drives Aluminum arm mount (Triangle) Aluminum arm mount (Circle) Aluminum arm mount (Square) Aluminum arm mount (X-2.5) Wheel nuts
ACCESSORIES
THIS IS THE ELECTRIC POWERED FACTORY TEAM TC5 TOURING CAR KIT. INCLUDES: HIGH PERFORMANCE WOVEN CARBON FIBER CHASSIS, CARBON FIBER SHOCK TOWERS, FULL COMPLEMENT OF FACTORY TEAM CARBON FIBER & BLUE ALUMINUM PARTS REQUIRES: 2 CHANNEL RADIO WITH A STEERING SERVO, MOTOR, ESC, BATTERY, TIRES, WHEELS, CHARGER, BODY AND MISC. BUILDING & FIELD EQ
| On-Road Nitro | Off-Road Nitro | On-Road Electric | Off-Road Electric | Search |