ASC30111    TC4 RTR Touring Car

TECH NOTES

This is the 1/10 scale electric powered, radio controlled,
Associated RC10 TC4 on-road ready-to-run Touring Car.
This kit is designed for the advanced touring car racer.

FEATURES: Chassis:0.098" (2.5mm) thick, redesigned with the batteries moved
closer to the center line of the car than the TC3 for quicker
directional transitions
Drive: Four wheel shaft drive, blue anodized aluminum driveshaft
Motor: Team Associated Reedy Radon 17 turn
Radio: 2 channel AM 27MHz pistol grip Team Associated XP2 made by
Airtronics with steering and throttle trim and reverse, steering
dual rate, ATV, charge jack and standard size steering servo
Ball Bearings: Rubber sealed full bearing set
Shocks: Factory oil-filled, VCS (Volume Compensating System) Macro
composite bodied with preload spacers to adjust ride height
Gearbox: Closed front & rear
Differentials: Ball type
Transmission: Single-speed-speed
Body: Pre-painted and trimmed with simulated carbon rear wing and
hood
Tires: Rubber treaded with inserts, 2.5" (64mm) outer diameter,
1" (26mm) wide
Wheels: Eight spoke chrome finish 2" (52mm) diameter, 1" (26mm)
wide
Speed Control: Electronic-LRP Ai Super Reverse Digital, ASCM8320
Bumper: Front, foam
Suspension: Adjustable
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Steering: Ackerman type that allows the inside front wheel to turn
tighter than the outside front wheel.
Servo Saver: Included, adjustable

INCLUDES: One 1/10 scale electric powered 4WD Associated TC4 ready to run
Touring Car with 17 turn motor, pre-painted and trimmed body,
tires, wheels, 23 tooth pinion gear, 72 tooth spur gear, 2 ch
radio with servo, ESC with reverse, street tuner decal sheet and
illustrated instruction manual

REQUIRES: Radio Batteries: (8) AA size
Battery: 6 cell w/standard connector (stick or side by side)
Charger: AC/DC timed or peak for 6-cell battery
Misc. Items: Building and track equipment

SPECS:      VEHICLE-
Length: 14.7" (373mm)
Width:   7.5" (190mm)
Height:  4.2  (107mm) at rear body mount (highest point)
Weight:  3.03lbs (1375g) with electrics, without body
Wheelbase: 10.2" (259mm)
Tread: Front and Rear- 6.5" (164mm)
Front and Rear Track: 7.5" (190mm)
Ground Clearance: 0.31" (8mm)
Gear Ratio: 2.50:1
Tires- Front and Rear: 2.5" (64mm) outer diameter, 1" (26mm) wide
BODY-
Length: 1.6" (440mm)
Width: 7.5" (190mm)
Height: 4.1" (104mm)

COMMENTS: For Replacement Ball Bearings use:
Qty.  Size           Location             Qty. Bearing Set
2    4x8x2mm        Diff                  1   ASCC3916
2    3/8 x 5/8mm    Outdrives             1   DTXC1437
4    3/16 x 5/16mm  Steering (optional)   2   DTXC1413
2    3/16 x 3/8mm   Fr Input Shaft        1   DTXC1423
1    3/16 x 3/8mm   Input Bearing Housing 1   DTXC1423
1    3/16 x 3/8mm   Spur Gear             1   DTXC1423
4    3/16 x 3/8mm   Fr Hubs               2   DTXC1423
4    3/16 x 3/8mm   Rear Hubs             2   DTXC1423

It is not possible to request a specific radio channel or body color
because they are supplied by the manufacturer at random.

ACCESSORIES

THIS IS THE ASSOCIATED 1/10 SCALE TC4 RTR ON ROAD SEDAN TOURING CAR.
INCLUDES: 4-WHEEL SHAFT DRIVE, 3MM COMPOSITE CHASSIS, ADJUSTABLE CAMBER &
STEERING, FULL BALL BEARINGS, PAINTED BODY, 17 TURN MOTOR, BALL DIFFS
REQUIRES: (8) AA CELLS, 6 CELL FLAT BATTERY PACK, CHARGER, TOOLS & TRACK
EQUIPMENT

 |  On-Road Nitro  |  Off-Road Nitro   |   On-Road Electric  |  Off-Road Electric  |  Search  |