ASC4017     RC12L4 Factory Team Kit

TECH NOTES

This is the 1/12 scale electric powered, radio controlled, 2 wheel drive
Associated RC12L4 Factory Team on-road 4-cell competition Car kit.

Includes the following Factory Team components; Blue Aluminum and Molded  _
Graphite Bulkheads, Aluminum Adjustable Servo Mounts, Precision Machined
Hubs, IRS Graphite Pro Rear Axle, Blue Aluminum Ball Studs
Aluminum Threaded Shock, Blue Titanium Turnbuckles and
Sealed Ball Bearings

FEATURES: Chassis: Graphite with adjustable 4-cell battery trays, cross brace
upper and lower pod plates
Drive: Rear wheel drive
Ball bearings: Full set, sealed
Shock: VCS (volume compensating system) aluminum bodied, coil over,
oil-filled micro size mounted to rear damper plate at rear center
of chassis
Differentials: Large D ring type
Transmission: Direct drive single speed
Bumpers: Two front mini bumper front chassis protectors
Front Suspension: Adjustable with new upper arm mounts allowing 0, 5,
or 10 degrees of reactive caster
Rear Suspension: Single shock, rigid upper graphite pod plate and two
fiberglass T-bars, .063 or .075
Rear Hubs: 7075 T-6 aluminum, single clamp style left hub, dual ball
bearing supported right diff hub with large "D" style locking diff
rings
Camber: Adjustable
(Camber is how the tires sit vertically)
Steering: Direct
Servo Saver: Included

INCLUDES: Associated RC12L4 Factory Team rolling chassis with oil-filled shock,
100 tooth 64 pitch Kimbrough spur gear, 30 weight shock oil, decals
ball bearings, illustrated instruction manual and antenna tube_

REQUIRES: Radio: 2-Channel
Servo: One mini size
Radio Batteries: (8) AA size
On-Board Battery: 4-cell saddle pack
Speed Control: Electronic
Motor: Stock or modified
Charger: AC/DC timed or peak for 4-cell battery
Body: 1/12 scale
Wheels and Tires: 1/12 scale that fit a 3-hole hub
Paint: Brush-on or aerosol for Lexan body
Misc. Items: Building and track equipment

COMMENTS: For Replacement Ball Bearings use:
Qty.    Size           Location            Bearing Set Qty.
(4)   1/8"x5/16      Front wheels        (use 2-DTXC1401)
(2)   1/4"x3/8"      Motor mount         (use 1-DTXC1433)
(2)   1/4"x3/8"      Rear axle           (use 1-DTXC1433)

ACCESSORIES

THIS IS THE ELECTRIC POWERED ASSOCIATED RC12L4 FACTORY TEAM ON-ROAD CAR KIT.
FEATURES: GRAPHITE CHASSIS, ADJUSTABLE SERVO MOUNTS & BATTERY TRAYS, VCS MICRO
SHOCK, 3 BOLT CLAMPING HUB, GRAPHITE AXLE, 30WT SHOCK OIL, SEALED BEARINGS
REQUIRES: 2CH RADIO W/MINI SERVO, 8 AA SIZE BATTERIES, 4-CELL SADDLE PACK,
1/12 SCALE WHEELS, TIRES, & BODY, MOTOR, SPEED CONTROL, CHARGER, TOOLS

 |  On-Road Nitro  |  Off-Road Nitro   |   On-Road Electric  |  Off-Road Electric  |  Search  |