Associated
Off-Road Electric

Hobbies R Us

Associated
Off-Road Electric

 


HomePage

R/c Airplanes

R/c Boats

R/c Cars

 Nitro  On-Road Cars

Nitro Off-Road Cars

 Electric On-Road

Electric Off- Road

 

Click Here For Pricing & Stock Availability

ASC7024    RC10T4 RS Race-Spec RTR
TECH NOTES
This is the electric powered, radio controlled ready to run
Team Associated RC10T4 RS (Race Spec) off-road racing truck.
FEATURES: Chassis: Molded composite, low center of gravity
Transmission: 2.6:1 laydown Stealth type, high-torque capacity
Bearings: Full set
Shocks: Oil-filled blue anodized aluminum (silver springs on front
and green springs on the rear)
Radio: Team Associated XP2 2-channel AM with metal gear servo,
transmitter has charge jack, can use Wall Charger (ASCM9833) if
rechargeable batteries are used (charger and batteries are not
included)
Speed Control: LRP Ai digital
Motor: Associated Reedy Radon 17 turn
Dog Bones: Steel dog bones (not CVDs)
Front Tires: Associated racing compound ribbed
Rear Tires: Associated racing compound bow-tie style
Wheels: White (dyeable) dish style 2.2" (56mm) diameter
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Steering: Angled-bellcrank design to minimize bump steer and maintain
constant steering angles throughout the range of suspension travel
Body: Painted racing truck style with rear wing
Slipper Clutch: High-torque capacity double-sided provides finer
adjustment
Impact-resistant rear motor guard
Adjustable battery position
Built-in servo saver
INCLUDES: One pre-assembled RC10T4 RS with oil-filled shocks, tires, foam
wheels,  87 tooth Kimbrough 48 pitch spur gear, steel turnbuckles,
20 tooth pinion gear, 17 turn motor, electronic speed control,
2-ch pistol grip AM radio w/steering servo, painted body, nylon
tools (for turnbuckles, wheel nuts etc.), hex wrench assortment,
decal sheet,and instructions for the model, speed control and
radio
REQUIRES: Radio Batteries: (8) AA size
Six cell flat battery pack with standard connector
AC/DC charger timed or peak for 6-cell battery
Building and track equipment
SPECS:    Length:            15.4"  (394mm)
Rear Track:        12.75" (324mm)
Front Track:       13"    (330mm)
Height:             5.5"  (140mm)
Wheelbase:         11.25" (286mm)
_        Ground Clearance:   1"     (25.4mm)
COMMENTS: It is not possible to request a specific color or radio channel when
ordering because they are supplied by the manufacturer at random.
If bearings are needed use:
Two DTXC1423   3/8 x 3/16 four needed, front wheels
Two DTXC1423   3/8 x 3/16 four needed, rear hub carriers
Two DTXC1423   3/8 x 3/16 four needed, transmission-top & middle
One DTXC1411   5/32 x 5/16 two needed, diff outdrives
One DTXC1437   3/8 x 5/8  two needed, ball diff
 
ACCESSORIES
THIS IS THE ASSOCIATED RTR RC10T4 STADIUM TRUCK W/RADIO & SPEED CONTROL.
FEATURES: ADJUSTABLE CAMBER, CASTER, & TOE-IN. 17 TURN MOTOR, MOLDED COMPOSITE
CHASSIS, STEEL TURNBUCKLES, ASSOCIATED 2 CH RADIO W/STEERING SERVO AND
& SERVO REVERSING. OIL FILLED ALUMINUM ADJUSTABLE SHOCKS, STEALTH TRANSMISSION.
REQUIRES: 6 OR 7 CELL FLAT BATTERY, CHARGER, 8 AA BATTERIES
 


  On-Road Nitro  |  Off-Road Nitro   |   On-Road Electric  |  Off-Road Electric  |  Search  |