ASC9035   Associated   RC10B4 Stealth Factory Team Buggy Kit 

TECH NOTES
   This is the 1/10 scale electric powered, radio controlled, 2 wheel drive
         Associated RC10 B4 Stealth Factory Team off-road buggy kit.

             Includes Over $150 worth of Factory Team upgrades.

          **Additional Info Will Be Added When It Becomes Available**

FEATURES: Construction: Molded carbon chassis, front and rear shock towers,
            front and rear A-arms, chassis brace and top plate, woven carbon
            fiber battery strap
          Transmission: 2.6:1 laydown Stealth type, high-torque capacity
          Bearings: Full set PTFE sealed
          Shocks: PTFE coated oil-filled hard anodized aluminum bodies .89" and
            1.18" with unobtainium shafts .71 and 1.02 stroke
          Dog Bones:
          Front Tires: Pro-Line M3 wide body buggy type
          Rear Tires:  Pro-line M3 Holeshot
          Wheels: Pro-line white (dyeable) dish
          Caster: Fully-adjustable, caster describes the angle of the kingpin
            as it leans toward the rear of the vehicle
          Camber: Fully-adjustable, camber describes the angle at which the
            tire and wheel sit when viewed from the front
          Toe-In: Fully adjustable, with titanium turnbuckles, toe-in describes
            the angle of the front tires as viewed from the top
          Steering: Angled-bellcrank design to minimize bump steer and maintain
            constant steering angles throughout the range of suspension travel
          Forward-swept front end design provides maximum
            front end ground clearance
          High-Torque capacity double-sided slipper provides finer adjustment
          Impact-resistant rear motor guard and wing mounts
          Adjustable battery position
          Servo saver: Built-in with aluminum servo saver bolt and heavy duty
            spring

INCLUDES: One pre-assembled RC10B4 Stealth buggy kit with oil-filled shocks,
            tires, foam inserts, wheels, titanium turnbuckles,
            photo-illustrated manual

REQUIRES: 2ch radio with two servos
          Radio Batteries: (8) AA size
          Pinion Gear:
          Motor:
          Six cell flat battery pack with standard connector
          AC/DC charger timed or peak for 6-cell battery
          Building and track equipment

SPECS:    Length:            365mm  (14.375")
          Rear Track:        254mm  (10")
          Front Track:       248mm   (9.75")
          Height:            108mm   (4.25")
          Wheelbase:         270mm  (10.625")
 _        Ground Clearance:   25.4mm (1")

COMMENTS:

          If bearings are needed use:
           Two DTXC1423   3/8 x 3/16 four needed, front wheels
           Two DTXC1423   3/8 x 3/16 four needed, rear hub carriers
           Two DTXC1423   3/8 x 3/16 four needed, transmission-top & middle
           One DTXC1411   5/32 x 5/16 two needed, diff outdrives
           One DTXC1437   3/8 x 5/8  two needed, ball diff

          Alternative pinion gear selections
                      Motor           48 Pitch pinion
                      stock                 24 teeth
                      14 turn               22 teeth
                      13 turn               21 teeth
                      12 turn               20 teeth
                      11 turn               19 teeth
                      10 turn               18 teeth
          Factory Team hopups include:
                           Aluminum Parts
            Servo Saver Bolt                   Wheel Spacers
            Front Hinge Pin Brace              Pivot Balls
            Milled Motor Plate                 Servo Balls
            Servo Mounts & Screws              8-32 Locknuts
            Body Clips
                           Graphite/Carbon Parts
            Top Plate                          Chassis
            Rear Chassis Brace
            Front & Rear A-Arms & Shock Towers
            Battery Strap
                           Other Upgrades
            Heavy Duty Servo Saver Spring      Steering Rack Bearings
            Center Drilled Trailing Front Axle Titanium Turnbuckles
            Lightweight Outdrive Set           Hard Anodized Shock Bodies
            Unobtanium Shock Shafts            14 PTFE Ball Bearings

                                                                 
ACCESSORIES
   THIS IS THE ASSOCIATED RC10B4 STEALTH FACTORY TEAM OFF-ROAD BUGGY KIT.
FEATURES: CARBON CHASSIS COMPONENTS, PTFE-COATED SHOCKS & BEARINGS, CARBON
  FIBER BATTERY STRAP, TITANIUM TURNBUCKLES, PRO-LINE M-3 TIRES,
REQUIRES: 2CH RADIO, 8 AA BATTERIES FOR RADIO, BODY, 6 CELL BATTERY, SPEED
  CONTROL, MOTOR, PINION GEAR, CHARGER, BUILDING & FIELD EQUIPMENT