ASC9037    RC10B4 RS Race-Spec RTR

TECH NOTES

This is the 1/10 scale electric powered, radio controlled, ready to run
Team Associated RC10B4 RS (Race Spec) off-road buggy kit.
_
FEATURES: Chassis: All-new molded composite, low center of gravity
Transmission: 2.6:1 lay down type, high-torque capacity
Bearings: Full set shielded, 14 total
Shocks: Oil-filled hard anodized aluminum
Radio: 27MHz AM Team Associated XP 2 with throttle ATV, steering and
throttle trim and reverse, metal gear steering servo, transmitter
does not have charge jack
Speed Control: LRP Ai digital with reverse and auto setup
Motor: Team Associated Reedy Radon 17 turn with composite impact
resistant motor guard
Dog Bones: CVD dog bones designed into rear suspension to push the
B-4 out to the maximum width for more traction
Front Tires: Proline M3 racing compound "wide-body" 1" (26mm) wide,
3.2" (82mm) diameter
Rear Tires:  Proline M3 racing compound, 1.8" (45mm) wide, 3.4"
(86mm) diameter
Front Wheels: Proline Velocity white 0.94" (24mm) wide, 2.4" (61mm)
diameter
Rear Wheels: Proline Velocity white 1.5" (38mm) wide, 2.4" (61mm)
diameter
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Suspension: Symmetrical suspension arm design with all four arms the
same length, captured hinge pins-no E-clips
Steering: Angled-bellcrank design to minimize bump steer and maintain
constant steering angles throughout the range of suspension travel
Body: Painted Proline buggy style with adjustable clear rear wing
color scheme is either red or blue with yellow flames, see COMMENTS
Forward-swept front end design provides maximum
front end ground clearance
Slipper Clutch: High-torque capacity double-sided provides finer
adjustment
Battery Position: Adjustable with new style battery hold down strap
Built-in servo saver

INCLUDES: One pre-assembled RC10B4 RS buggy kit with oil-filled shocks,
tires, foam inserts, wheels, 81 tooth spur gear, steel turnbuckles,
23 tooth pinion gear, 17 turn motor, electronic speed control,
2-ch pistol grip AM radio w/steering servo, painted body, clear _
rear spoiler, decals and photo-illustrated manual

REQUIRES: Radio Batteries: (8) AA size
Battery Pack: Six cell flat with standard connector
AC/DC Charger: Timed or peak for 6-cell battery
Building and track equipment

SPECS:    Length:            365mm  (14.375")
Rear Track:        254mm  (10")
Front Track:       248mm   (9.75")
Height:            108mm   (4.25")
Wheelbase:         270mm  (10.625") adjustable
_        Ground Clearance:   25.4mm (1")

COMMENTS: It is not possible to request a specific radio channel or color when
ordering because they are supplied by the manufacturer at random.

For Replacement Ball Bearings use:
Qty.  Size      Location                 Qty. Bearing Set
2   3/16x3/8"  Transmission               1   DTXC1423
2   3/8x5/8"   Transmission               1   DTXC1437
2   3/16x3/8"  Idler Gear Shaft           1   DTXC1423
4   3/16x3/8"  Rear Hub Carriers          2   DTXC1423
4   3/16x3/8"  Front Hub Carriers         2   DTXC1423

Alternative pinion gear selections
Motor           48 Pitch pinion
stock                 24 teeth
14 turn               22 teeth
13 turn               21 teeth
12 turn               20 teeth
11 turn               19 teeth
10 turn               18 teeth

ACCESSORIES

THIS IS THE ELECTRIC POWERED ASSOCIATED RC10B4 RS (RACE SPEC) RTR BUGGY.
FEATURES: 17-TURN REEDY RADIO MOTOR, 2.6:1 LAYDOWN TRANSMISSION, HIGH-TORQUE
DOUBLE-SIDED SLIPPER CLUTCH, DIGITAL SPEED CONTROL W/REVERSE, AM RADIO W/
METAL GEAR STEERING SERVO, STEEL DOG BONES, CAPTURED HINGE PINS
REQUIRES: 6-CELL FLAT BATTERY, CHARGER, BUILDING & TRACK EQUIPMENT