ASC2916   .15X PS Universal Crankshaft Off-Road

TECH NOTES
               This is the Team Associated .15X pull start engine
                        with a Universal Type Crankshaft

FEATURES: Engine comes with two different threaded studs to achieve the
            crankshaft type needed (standard and for RC10GT)
          Aluminum piston and chrome-plated brass sleeve
          Machined 7075 aluminum connecting rod
          All ports are in optimum alignment for max power and efficiency
          Rotary type carburetor

INCLUDES: One Team Associated .15X pull start engine with universal crankshaft
          One standard crankshaft threaded stud
          One RC10GT clutch nut (male)
          One rubber air filter boot
          Two foam filter elements
          Two 6" zip ties
          One instruction and warranty information sheet

REQUIRES: Glow plug: MC59 recommended
          Fuel: 10-20% nitro content car fuel
          Flywheel

SPECS:    Output: N/A per manufacturer
          Weight: 8.642oz (245g)
          Crankshaft size at threads: 0.196" (5mm)
          Distance between mounting holes same side: 0.43" (11mm)
          Distance between mounting holes opposite side: 1.23" (31.4mm)
          Distance/top of cylinder head to bottom of mounting flange: 2.71" (69.0mm)
          Distance between muffler mounting holes: 1.1" (28.2mm)
          Height/bottom of crankcase to top of cylinder head: 3.21" (81.5mm)
          Width including mounting flanges: 1.53" (38mm)
          Width of crankcase beneath mounting flanges: 0.98" (24.8mm)

COMMENTS: Direct drop in for Nitro TC3.