Hobbies R Us

BILB2472   Billing Boats   1/33 Mary Ann 55cm

TECH NOTES

This is the 1/33rd scale Mary Ann Nordsokutter by Billing Boats. The Mary Ann
is a typical 45-ton cutter commonly seen in the harbor at Esbjerg, Denmark.
This model was based on original ship drawings.

FEATURES: Lazer-Cut Mahogany, Birch and Light Plywood
          Wood Planked Hull and Deck
          Woven Cloth Sails             **this boat is not designed for R/C!
          Brass and Plastic Fittings
          Scale and Highly Detailed

INCLUDES: Mahogany Ribs and Detailing, Lite Ply Detailing, Birch Planking
          Brass and Plastic Fittings for Detailing
          String for Riggings
          Instructions and Plans

SPECS:    Length: 55cm (21.15")  Height: 43cm (16.5")
          Width: 16cm (6.15")    Scale: 1:33

REQUIRES: CA Glue, 6 Minute Epoxy
          Sanding Paper
          Hobby Knife, Razor Saw
          Metric Ruler
          Paint
          Wood Clamps (something like cloths pins)

COMMENTS: This is a one star boat.  Billing Boats rates their boats on a zero
            to three scale.  Zero stars is easiest to build, three the hardest.
          This would be good for a second boat to build.

Mahogany Stain is recommended per Billings, customer may wish to visit their
local hardware store for a urethane stain.

THE MARY ANN IS 1/33RD SCALE VERSION OF AN ORIGINAL FISHING CUTTER LOCATED IN
THE HARBOR AT ESBJERG, DENMARK.
REQUIRES: CA GLUE, 6 MINUTE EPOXY, HOBBY KNIFE, RAZOR SAW, PAINT, SAND PAPER,
WOOD CLAMPS.
  

|  Homepage  |  Wooden Ships  |  Ship Accessories  |  Search  |