Hobbies R Us

BILB2476   Billing Boats   1/50 Nordkap 81cm

TECH NOTES

This is the 1/50th scale Nordkap boat by Billings.  This static display
kit is based on original ship drawings of a typical trawler from the North
Sea, built in the 1970's at an English shipyard.

FEATURES: Planked Hull and Deck
          Lazer-Cut Wood Parts
          Detailed Plastic and Brass Accessories
          Highly detailed, Scale Boat
          This Kit is for STATIC DISPLAY ONLY.

INCLUDES: Birch and Mahogany Planking
          Bubble Pack Including Brass and Plastic Fittings, Drive Hardware
            and Plastic 3-Bladed Propeller
          Lazer-Cut Sheeting
          Spool of String
          Plans and Instructions

SPECS:    Scale: 1/50
          Length: 31" (81cm)
          Width: 7-1/3" (19cm)
          Height: 16-1/2" (43cm
          Prop Size: 1-1/4" diameter (pitch not given)

REQUIRES: CA Glue and Wood Cement
          Hobby Knife, Razor Saw, Small Drill and Small Hammer
          Metric Ruler and Right Angle
          Sandpaper
          Masking Tape
          Paint

COMMENTS: This is a two star boat.  Billings rates the difficulty of building
            on a scale of zero to three, zero being the easiest and three
            being the most difficult.  This boat IS NOT FOR BEGINNERS and
            would be a good second or third boat.

THE 1/50 SCALE NORDKAP TRAWLER INCLUDES PLASTIC AND BRASS FITTINGS, PROPELLER,
DRIVESHAFT, STUFFING BOX, INSTRUCTIONS AND PLANS
REQUIRES:  CA GLUE, 6 MINUTE EPOXY, METRIC RULER, SANDPAPER, PAINT, HOBBY
KNIVES, WOOD CLAMPS (LIKE CLOTHS PINS), RIGHT ANGLE AND MASKING TAPE
  

|  Homepage  |  Wooden Ships  |  Ship Accessories  |  Search  |