Click Here For Pricing & Stock Availability

 The Dragen is a 1/12th scale version of Single Masted Sailing Vessel that was
used throughout the world, especially in Europe.

FEATURES: Planked Hull and Deck
          Lazer-Cut Wood Frame, Some Wood Detailing Requires Cutting
          Detailed Plastic and Brass Accessories
          Highly Detailed, Scale Boat
          FOR STATIC DISPLAY ONLY

INCLUDES: Oak Planking
          Brass and Plastic Fittings
          Lazer-Cut Balsa Sheeting and Balsa Uncut Sheeting
          Spool of String
          Cloth Sails
          Lead Ballast
                                          Nails                                         .
                 Plans and Instructions

SPECS:     Height: 100cm (38.46")       Scale: 1:12
           Length: 78cm (30")           Beam: 18cm (7")

REQUIRES: Wood Glue, CA Glue and Epoxy
          Sandpaper
          Hobby Knife and Razor Saw
          Masking Tape
          Metric Ruler
          Right Angle
          Paint

COMMENTS: This is a two star boat.  Billings rates building difficulty on
            a scale of zero to three, zero being the easiest and three
            being hardest.  This would be a good 2nd or 3rd boat to build.

Mahogany Stain is recommended per Billings, customer may wish to visit their
local hardware store for a urethane stain.

THE 1/12 SCALE DRAGEN INCLUDES WOOD PARTS, PLASTIC AND BRASS DETAILING, STRING,
  NAILS, BALLAST, SAIL CLOTH, PLANS AND INSTRUCTIONS.
REQUIRES:  CA GLUE AND EPOXY, SANDING PAPER, HOBBY KNIFE AND RAZOR SAW, MASKING
  TAPE, METRIC RULER, NAIL NAILER, PAINT