Hobbies R Us

BILB2603   Billing Boats   1/30 Norden 34.5cm

TECH NOTES

 This is a 1/30th scale replica of a Typical Coaster of the kind which was,
in earlier years very commonly used along the Western coast of Denmark.

FEATURES: Planked Hull
          Detailed Plastic and Brass Accessories
          Highly Detailed, Scale Boat
          Laser-Cut Wood
          For Static Display Only

INCLUDES: Oak and Mahogany Planking
          Bubble Pack with Propeller, Brass and Plastic Fittings
          Pre-Cut Balsa Sheeting and Balsa Uncut Sheeting
          Three Spools of String
          Plans and Instructions

SPECS:    Height: 28cm (10.75")       Scale: 1:30
          Length: 34.5cm (13.25")     Beam: 11.5cm (4.42")

REQUIRES: Wood Glue, CA Glue and Epoxy
          Sandpaper
          Hobby Knife and Razor Saw
          Masking Tape
          Metric Ruler and Right Angle
                                  Paint                                              .

COMMENTS: This is a zero star boat.  Billings rates building difficulty on
            a scale of zero to three, zero being the easiest and three
            being hardest.  This would be a good first boat to build.

Mahogany Stain is recommended per Billings, customer may wish to visit their
local hardware store for a urethane stain.

THE 1/30TH SCALE NORDEN INCLUDES: WOOD PARTS, PLASTIC AND BRASS ACCESSORIES,
                                THREE SPOOLS OF STRING, PLANS AND INSTRUCTIONS.
REQUIRES:  CA GLUE AND EPOXY, SANDING PAPER, HOBBY KNIFE AND RAZOR SAW, METRIC
           RULER, MASKING TAPE, NAIL NAILER, PAINT AND PAINT BRUSH.
  

|  Homepage  |  Wooden Ships  |  Ship Accessories  |  Search  |