Click Here For Pricing & Stock Availability

 The ST. CANUTE is a 1/50th scale version of a Tugboat and Icebreaker in Odense
Harbor under its original name St. Knud.

FEATURES: Planked Hull and Deck
          Pre-Cut Wood Frame, Some Wood Detailing Requires Cutting
          Detailed Plastic and Brass Accessories
          Highly Detailed, Scale Boat
          Kit is for STATIC DISPLAY ONLY

INCLUDES: Oak Planking
          Bubble Pack, Including Brass and Plastic Fittings
          Pre-Cut Balsa Sheeting and Balsa Uncut Sheeting
          Spool of String
          Cloth Sails
          Plans and Instructions

SPECS:    Height: 42cm (16")       Scale: 1:50
          Length: 56cm (21.5")     Beam: 15.5 (6")
REQUIRES: Wood Glue, CA Glue and Epoxy
          Sandpaper
          Hobby Knife and Razor Saw
          Masking Tape
          Metric Ruler
          Right Angle
          Paint

COMMENTS: This is a one star boat.  Billings rates building difficulty on
            a scale of zero to three, zero being the easiest and three being
            hardest.  This would be a good first or second boat to build.

Mahogany Stain is recommended per Billings, customer may wish to visit their
local hardware store for a urethane stain.

THE ST CANUTE IS A 1/50 SCALE VERSION OF A TUG BOAT AND ICEBREAKER USE IN THE
ODENSE HAROUR UNDER ITS ORIGINAL NAME ST KNUD.
INCLUDES: PLANKING, SHEETED WOOD, FITTINGS, SAIL CLOTH, INSTRUCTIONS AND PLANS.
REQUIRES:  CA GLUE, SAND PAPER, HOBBY KNIFE AND RAZOR SAW, MASKING TAPE, METRIC
RULER, PAINT AND PAINT BRUSH.