Click Here For Pricing & Stock Availability

 This is the 1/30th scale Regina Sailing Ship by Billings Boats.  This Danish
 Sloop (Single Masted Sailing Vessel) was some of the Most Common Vessels Seen
  Along the Danish Coasts Throughout the 19th and Early Part of 20th Century.
   The Regina Transported Passengers and Cargo Between the Danish Islands.

FEATURES: Lazer-Cut Mahogany, Birch and Light Plywood
          Wood Planked Hull and Deck
          Woven Cloth Sails
          Brass and Plastic Fittings
          Scale and Highly Detailed

INCLUDES: Mahogany Ribs and Detailing, Lite Ply Detailing, Birch Planking
          Brass and Plastic Fittings For Detailing
          String For Riggings
          Instructions and Plans
 

SPECS:    Length: 73cm (27.5")        Height: 65cm (24.5")
          Width:  16.5cm (6.35")     Scale:  1:30
REQUIRES: Wood Glue, CA Glue and Epoxy
          Sandpaper
          Hobby Knife and Razor Saw
          Masking Tape
          Metric Ruler
          Right Angle
          Paint

COMMENTS: This is a Two Star Boat.  Billings rates building difficulty on
            a scale of zero to three, zero being the easiest and three
            being hardest.  This would be a good 2nd or 3rd boat to build.
          This Boat Is Not Designed For Remote Control.

Mahogany Stain is recommended per Billings, customer may wish to visit their
local hardware store for a urethane stain.

         THIS IS A 1/30TH SCALE, NON-RADIO CONTROLLED REGINA BOAT KIT.
                 THE REGINA IS A DANISH IS AN ALL WOOD BOAT.
REQUIRE: HOBBY TOOLS, GLUE