|
Coverite |
Hobbies R Us |
Coverite |
COVQ0247 Coverite 21st Century Microlite Yellow
TECH NOTES
This is a 72" (183cm) roll of 21st Century Coverite Microlite Covering
in Yellow.
**Microlite CANNOT be painted with Coverlite 21st Century or Top Flite**
**LustreKote spray paint. Using any type of paint is not necessary**
**or recommended.**
FEATURES: Perfect for all park flyers, indoor models and light fly aircraft
Ultra light weight, only 0.6oz (17g) per square yard
High-gloss finish
Adhesive pre-applied to back
INCLUDES: One 72" x 27-3/4" (183cm x 70cm) roll of 21st Century Coverite
Microlite in Yellow
One instruction sheet
REQUIRES: Sealing Iron (COVR2700)
Iron Cover (COVR2702)
Trim Seal Iron (COVR2750)
Hobby Knife (HCAR0105)
#11 Blades (5-pack-HCAR0211, 100-pack-HCAR0311)
Single Edge Razor Blades (10-pack-HCAR0212, 100-pack-HCAR0312)
Metal Straightedge (HCAR0460)
24" x 36" (460mm x 910mm) Builder's Cutting Mat (HCAR0456)
Covering Thermometer (COVR2410)
Scissors (HCAR0670)
Masking Tape (GPMR1010)
Sandwich bag containing lead or steel shot
SPECS: Length: 72" (183cm)
Width: 27-3/4" (70cm)
COMMENTS: The ideal temperature for applying Microlite to open framework such
as wing ribs, leading and trailing edges, fuselage stringers
and also to sheeted surfaces is about 175°-195°F (80°-90°C).
Increase iron temperature to 230°-250°F (110°-120°C) for tightening
the covering over open framework. For further info on covering
techniques and iron temperature see instruction sheet with each
roll.
| Homepage | R/C Airplanes | Accessories | Batteries | Chargers | Covering | Decals | Electronic Speed Controls | Engines |
| Engine Mounts | Field Equipment | Fuel | Fuel Tanks | Glow Plugs | Glues | Landing Gears | Nuts/Bolts | Paint |
| Paint Supplies | Props | Push Rods | Radios | Simulators | Spinners | Tools | Wheels | Search |