COVQ1410   Coverite Micafilm   Transparent Red 29x65"

TECH NOTES
          This is Micafilm Ultralight Film Covering from Coverite.
This Iron-On Covering has Mica-Fibers that Bond to the Wood using Low Heat and
a coat Balsarite Formula for Fabric pre-applied onto the wood surface.

FEATURES: Tough Mica-Fibers make Micafilm the most Rip-Proof Covering around.
          40% to 70% Lighter and 700% Tougher than Any Other Iron-On Available.
          It is Ultra-Thin and Ultra-Light, Reversible and Paintable.
          Applies at Low Temperatures, making it Ideal for Sheeted Foam Wings.
          Requires Less Tugging and Skill to Apply.
          THIS IS NOT FUELPROOF!
          Remains Pliable even as it ages, never becomes brittle regardless of
            climactic changes.

INCLUDES: One Roll of Micafilm Transparent Red
          One Instruction Sheet

REQUIRES: Balsarite Fabric Formula 8oz COVR2500 or 16oz COVR2510, Brushes,
            Heat Gun, Sealing Iron, Coverite Ironex, Scissors and Hobby Knife.

SPECS:    Weight: 1.25 oz/sq yd (0.08-0.14 oz/sq ft)
          Width:  29"
          Length: 65"
          Temperature for Sheeted Foam: 220-240 Degrees F.
          Temperature for Open-Surfaces: 275-300 Degrees F.

COMMENTS: If removing Micafilm from a surface, it works best if a heat gun is
            used.
          If using Three or More Rolls of Micafilm, order COVQ1510 (15 foot) to
            ensure a consistent color match.

|  Homepage  |  R/C Airplanes  |  Accessories  |  Batteries  |   Chargers  |  Covering  |  Decals  |  Electronic Speed Controls  |  Engines  |

|  Engine Mounts  |  Field Equipment  |  Fuel  |  Fuel Tanks  |  Glow Plugs  |  Glues  |  Landing Gears  |  Nuts/Bolts  |  Paint  |  

|  Paint Supplies  |  Props  |  Push Rods  |  Radios  |  Simulators  |  Spinners  |  Tools  |  Wheels  |  Search  |