DTXM1070   DuraTrax   IntelliSpeed 12T Modified Reverse ESC 

TECH NOTES
              This is the Team Duratrax I-Speed Modified
     Forward and Reverse Electric Speed Control with a Futaba J connector.
              FOR MODIFIED MOTORS DOWN TO 12 TURNS ONLY!
    ABS Braking for better control in and out of corners, and adjustable
            reverse-delay, reverse-lockout, and traction control.

FEATURES: Forward and Reverse and ABS Braking.
          Excellent for intermediate to advanced racers.
          Easy Pushbutton Setup.
          Thermal Protected.
          More efficient than mechanical Speed Controls.
          Reverse Lockout.
          LED (    Forward and Red-Full Speed, Red and Green-Reverse).
          Pre-Installed Futaba J Connector.
          Pre-Installed Bullet Type Connectors For Motor.
          Standard (Tamiya Type) Connector For Battery Pack.
          On/Off Switch.
          BEC Equipped.
          120-Day Warranty

INCLUDES: One I-Speed Forward/Reverse Electronic Speed Control with Futaba J
            Connector and Bullet Motor Connectors.
          Three .1 Type Capacitors.
          One Instruction Sheet

SPECS:    On-Resistance:                 0.0035
          Traction Control:              0.0, 0.1, or 0.2
          Reverse Delay:                 0.3 or 0.8
          Maximum Continuous Current:    232amps
          Maximum Peak Current:          800amps
          Number of Cells:               6-7
          Size with Heatsinks:           1.48"L x 1.34"W x 0.57"H
          Weight with Heatsink:          2.44 ounces
          Connector:      Motor:         bullet
                          Battery:       standard (Tamiya)
          Motor:                         12 Turn Modified
          Wires:                         14 gauge

REQUIRES: Installing Three .1 Type Capacitors Onto Motor with Solder
          Installing onto an Electric Vehicle
          6 or 7 Cell Battery
          Motor (12 Turn or Above)

|  Homepage  |  R/C Airplanes  |  R/C Boats  |  R/C Cars  |  Search  |