DTXD11    1/18 Mini Quake RTR 

TECH NOTES

This is the 1/18 scale Electric Powered, Radio Controlled, 4-Wheel Drive
Duratrax Mini Quake Off-Road Ready-to-Run Monster Truck.

FEATURES: Chassis: Composite tub style with countersunk screws
Drive: Four wheel shaft drive
Motor: 380 size motor (DTXC3307)
Radio: 2-channel AM pistol grip made by Futaba with steering and
throttle trim, adjustable steering rate, charge jack for optional
NiCd batteries, battery LED and one SX100 servo for steering
Ball bearings: Full set included, 14 total
Shocks: Eight oil filled with black composite bodies
Gearbox: Sealed front and rear
Tires: 2.60" (65mm) diameter,  1.4" (36mm) wide rubber
Wheels: Five spoke white plastic construction
Speed Control: High-Frequency ESC5000 Electronic Speed Control with
forward and reverse (no brake)
Micro RS4/Mini-T style connector (DTXM1260)
Bumpers: Front and rear black plastic with skidplates
Suspension: Fully independent
Camber Tie Rods: Fixed
Steering Tie Rods: Fixed non-adjustable,
Servo Saver: None
Six cell 600mAh NiCd battery pack (DTXC2196)
200 mAh wall charger (DTXP4080)
Warranty Period: 90 days except for parts covered by the Stress-Tech
Guarantee. Stress-Tech parts have a one year warranty

INCLUDES: Duratrax Mini Quake with eight oil-filled shocks, 380 motor,
electronic speed control, painted body, tires, wheels, 6-cell
600mAh, NiCd made with AE size cells, 16 tooth pinion gear, 46 spur
gear, decals, 2-channel radio, eight AA batteries, 200mAh wall
charger, decals and instruction manual.

REQUIRES: Installation of the 8 AA batteries in the transmitter, charging the
included battery pack with included wall charger for three hours.

SPECS:      VEHICLE-
Length:      9.5" (240mm)
Width:       7.4" (185mm)
Height:      4.7" (120mm)
Weight:     25 oz (725g) approx.
Wheelbase:   6.5" (166mm)
Tread: Front-5.6" (143mm)   Rear-5-5/8" (143mm)
Front Track: 7.2" (182mm)
Rear Track:  7.2" (182mm)
Ground Clearance: 1.5" (32mm)
BODY-
Length:      8.8" (223mm)
Width:       3"    (70mm)
Height:      2.25" (55mm)

COMMENTS: For Replacement Ball Bearings use:
All 14 bearings in this model are 6x10mm. Use stock number DTXC1561
if you need replacement bearings.
The setup procedure for the ESC5000 is the same as the 1000 and 2000.

The following radio channels and body colors are available:
DTXD1162   GREEN
DTXD1164   BLUE
DTXD1168   RED
DTXD1170   ORANGE
DTXD1172   WHITE
DTXD1174   PURPLE

Brushless Motor Recommendation:
The Air Power 3600 kV Brushless Motor (GHHG9100) from Golden Horizons
works in this vehicle.
It fits in the stock motor mount and the shaft fits the stock Mini
Quake pinion gear. Use the Mamba 25A RC car Brushless Speed Control
(CSEM2020). Set speed control for low start power and low timings.
There will be a small amount of cogging (stuttering) when
accelerating from a standing start.

The Mini Quake is also available in a prebuilt version DTXC0011, that
has a clear body and does not include radio, speed contol, battery
or charger. The prebuilt version includes hop-ups such as front and
rear ball diffs and aluminum CV driveshafts, adjustable tie-rods
and chrome finish wheels.

ACCESSORIES

THIS IS THE ELECTRIC POWERED READY TO RUN DURATRAX MINI QUAKE MONSTER TRUCK.
FEATURES: 380 SIZE MOTOR, 8 OIL FILLED SHOCKS, FULL SET OF BALL BEARINGS, SHAFT
DRIVEN 4WD, COMPOSITE TUB CHASSIS, FR & R SKIDPLATE/BUMPER, 2-CH PISTOL GRIP
RADIO W/1 SERVO & CHARGING JACK FOR OPTIONAL NICD PACK (NOT INCLUDED) 6-CELL
600MAH BATTERY W/CHARGER, 2.6" X 1.4" (65MMX36MM) RUBBER TIRES