DTXD20   Duratrax Evader EP Stadium Truck RTR

Video 1  Video 2

TECH NOTES
This is the 1/10 Scale Electric Powered, Radio Controlled, Two-Wheel Drive(2WD)
    DuraTrax Evader Ready-To-Run Off-Road Stadium Truck with a DuraTrax by
  Futaba AM 2-channel Radio, Electronic Speed Control and Custom Painted Body.

FEATURES: Factory-assembled chassis and body requires no building, trimming or
            painting with many built-in upgrades.
          A countersunk, race-inspired composite chassis that centers battery
            weight for better handling, and makes battery position a tuning
            plus.        

Body is already decorated in one of six customized, multi-color
            trim schemes - one to match each of the six available frequencies.
              Green Body = DTXD2062 75.430    Yellow Body = DTXD2070 75.590
              Blue Body  = DTXD2064 75.470    Silver Body = DTXD2072 75.630
              Red Body   = DTXD2068 75.550    Purple Body = DTXD2074 75.670

          Rear wheel drive.
          DuraTrax Proton Speed 20 turn modified motor with replaceable springs
            and brushes.
          Complete 16 piece ball bearing set.
          Rapid-Tune aluminum, oil-filled shocks.  Pre-installed and filled.
          Closed rear gearbox.
          Adjustable ball differential operates more smoothly than gear
            differentials, and provides protection for the drive train.
            Tighten it up for "clean" tracks, add "slip" when the going gets
            rough.
          Single speed transmission.
          Adjustable slipper clutch matches power delivery to the track
            surface, for better traction and speed.  Protected from debris by
            a cover, and has a removeable cap to easily access for adjustments.
          Competition tires with foam inserts for added support in the turns.
            Ribbed tires on the front and pin spike tire on the rear.
          One-piece, solid dish, white 2.2" racing rims.
          DuraTrax Sprint electronic speed control with forward, brake and
            reverse, recommended to handle a 20T or over motor.
          Front black plastic bumper.
          Rear black plastic motor guard.
          Adjustable racing suspension includes steel turnbuckles that are
            factory-set, but adjustable to the driving conditions you find.
            Toe-in and camber can be changed with and easy turn of a wrench.
          Rear universal drive shafts.
          Steering: bell-crank type
          Servo Saver: included
          Free start-up video
          Zip Thru Start-up instructions.
          DuraTrax by Futaba 2-channel AM 27MHz, pistol-grip radio with a
            BEC receiver that eliminates on-board batteries.  This radio has
            servo reversing, LED battery status light, steering and throttle
            trims, an SX-100 servo, removable antenna and a recharging jack
            for use with NiCds (optional, see COMMENTS).
          (8) AA size alkaline battery included for the transmitter.
          One-year Stress-Tech free replacement guarantee (Twice the duration
            of any other DuraTrax vehicle.) (see COMMENTS)
          Warranty Period: 90 days

INCLUDES: Evader ST rolling chassis with aluminum oil-filled shocks, 20T motor,
            electronic speed control, painted body, tires, foam inserts,
            wheels, 18 tooth pinion gear, 88 spur gear, instructions, ball
            differential, slipper clutch, universal shafts, steel turnbuckles.

REQUIRES: Battery: 6- or 7-cell flat pack w/standard (Tamiya-type) connector
          Charger: AC/DC timed or peak for 6- or 7-cell battery
          Misc. Items: Track equipment

SPECS:      Vehicle-
          Length:      16.1" (409mm)
          Width:       12.9" (327mm)
          Height:       6.6" (168mm)
          Weight:    3.6 lbs (    g)(approx.)
          Wheelbase:   11.6" (294mm)
          Front Track: 10.5" (266mm)
          Rear Track:  10.5" (266mm)
          Ground Clearance: 1.4" (36mm)
          Gear Ratio:       4.88:1
          Tires- Front:  2" x 2.2"
                  Rear:  2" x 2.2"
            Body-
          Length: 15-1/2"
          Width:   5-1/2"
          Height:  4-1/4"

COMMENTS: For Replacement Ball Bearings use:
            DTXC1097 Evader EP Bearing Set (15) piece, or use:
            (2)    5 x 8mm
            (2)   12 x 18mm
            (3) 4.75 x 9.55mm
            (8)    5 x 10mm
            (2)    5 x 9mm
          Servo replacement gears are: FUTM3416.

          For the optional NiCd conversion, use DTXP4010.
          Stress-Tech Free Replacement Parts Guarantee-
            "DuraTrax is so confident in the quality and durability of
            Stress-Tech plastic parts that they will replace any Stress-Tech
            part that breaks during the first 12 months you own your DuraTrax
            Evader ST RTR.  Just send the broken part to DuraTrax and they
            will send you a FREE replacement.  See the instruction manual
            for mailing address and details."  Note: This warranty is ONLY
            available directly from DuraTrax.  It is not available from place
            of purchase.

TECH NOTES: To order replacement bodies, use the following stock numbers:
            DTXC6403-GREEN     DTXC6404-BLUE     DTXC6405-PURPLE
            DTXC6406-SILVER    DTXC6407-YELLOW   DTXC6408-RED

OPTIONAL CHROME WHEELS: (These will fit fine on the Evader)
          RPM81563    RPM81863
          RPM81593    RPM81873
          RPM81623
          RPM81653

ACCESSORIES
         THIS IS THE 1/10 EVADER ST ELECTRIC READY-TO-RUN R/C TRUCK.

INCLUDES: PREASSEMBLED ROLLING CHASSIS, 2 CHANNEL RADIO, ELECTRIC SPEED CONTROL
     FULL BALL BEARINGS, BALL DIFFERENTIAL, ALUMINUM OIL-FILLED SHOCKS, VIDEO,
     20T MOTOR, PAINTED BODY, UNIVERSAL SHAFTS, STEEL TURNBUCKLES, AA BATTERIES

REQUIRES: 6- OR 7-CELL FLAT BATTERY AND CHARGER FOR THE BATTERY

 |  On-Road Nitro  |  Off-Road Nitro   |   On-Road Electric  |  Off-Road Electric  |  Search  |