|
Duratrax |
Hobbies R Us |
Duratrax |
|
|
DTXD67 DuraTrax Nitro Evader BX RTR
TECH NOTES
This is a 1/10 scale glow powered, radio controlled,
ready-to-run Duratrax Nitro Evader BX off-road buggy.
**Additional Info Will Be Added As It Becomes Available**
FEATURES: Chassis: Anodized 7075 T-6 aluminum
Drive:
Drive Type: Shaft driven
Radio: 2 channel Futaba pistol grip AM 27mHz with steering and
throttle trims, adjustable steering rate, servo reversing, charging
jack for optional NiCds (not included)
Engine: .18 (3.0cc) Duratrax (made by O.S.) pull-start with rotary
carburetor, and glow plug
Exhaust: Tuned pipe w/header
Fuel Tank: 75cc (2.53oz) flip top cap
Clutch: Hard anodized slipper type
Transmission:
Ball Bearings: Complete set, 16 total
Shocks: Four oil-filled, aluminum body with coil-over spring
Main Gear: tooth, (metal, plastic)
Gearbox: (open, sealed) (front, rear, both front and rear)
Differentials:
Brakes:
Tires:
Wheels:
Body: Painted polycarbonate
Bumpers:
Suspension:
Camber Tie Rods:
Steering Tie Rods:
Steering:
Servo Saver: included
Warranty Period:
INCLUDES: One 1/8 scale ready-to-run Nitro Evader BX off-road buggy with, oil
filled aluminum body shocks, pistol grip AM radio, .18 cu in (3.0cc
engine with tuned pipe, glow plug, painted body, glow starter with
battery, 8oz (250cc) fuel bottle, engine start-up video
REQUIRES: Fuel: 2-cycle glow fuel with 10%-15% nitromethane, --% lubricant-
Most of the fuels we carry meet or exceed the lubricant content
required for optimum performance and maximum engine life. In the
past, the conventional lubricant content used in fuel was 18%. But
with new advanced technologies, fuels like Red Alert and O'Donnell
for example, have a better quality of lubricants even though the
percentages of lubricant content are lower. These high-tech
lubricants provide exceptional cooling and protection.
SPECS: Vehicle-
Length with wing: 16.5" (421mm)
Width: 10.25" (260mm)
Height: 4.5" (115mm)
Weight: 3lbs 13.5oz (1743g) approx.
Wheelbase: 11" (281mm) (wheels on-center front-to-rear)
Tread- Front- Rear- (wheels on-center side-to-side)
Front Track: . " ( mm)
Rear Track: . " ( mm)
Ground Clearance: . " ( mm)
Gear Ratio: . :1
Tires- Front: " x . " ( x mm)
Rear: " x . " ( x mm)
Body-
Length: - / " ( mm)
Width: - / " ( mm) at rear wheels (widest point)
- / " ( mm) behind from wheels (thinnest point)
Height: - / " ( mm)
COMMENTS: For Replacement Ball Bearings use:
Qty. Size Location Bearing Set Qty.
(5) 8 x 12mm front & rear diff gears, clutch (use 3-DTXC1581)
(example) (2) 5 x 11mm front & rear gearbox (use 1-DTXC1547)
(2) 10 x 15mm front & rear gearbox (use 1-DTXC1595)
(5) 5 x 8mm clutch, (steering-4 orig. bushings) (use 3-DTXC1523)
(10) 6 x 12mm gearboxes, axles, drive shaft (use 1-DTXC1571)
Body pictured on the box is painted-
ACCESSORIES
THIS IS THE DURATRAX R/C NITRO EVADER BX READY-TO-RUN BUGGY.
FEATURES: ADJUSTABLE BALL DIFF, COMPLETE BALL BEARINGS, HARD ANODIZED SLIPPER
CLUTCH, 2CH AM RADIO, .18 CU IN (3.0CC) PULL-START ENGINE W/TUNED PIPE, NITRO
STARTER PACK, PAINTED BODY, OIL FILLED ALUMINUM BODY SHOCKS, PRO-LINE TIRES
REQUIRES: FUEL
|
On-Road Nitro |
Off-Road Nitro |
On-Road Electric |
Off-Road Electric |
Search
|