Duratrax, .18 w/Carburetor

Duratrax Engines

Hobbies R Us

Duratrax Engines

R/C Airplanes

R/C Boats

R/C Cars

Engines

Engine Parts

Fuel

Click Here For Pricing & Stock Availability

DTXG0225   DuraTrax   .18 w/Carburetor

TECH NOTES
        This is the DTX .18 Engine with Rotary Carburetor and Recoil.
     It has the same mounting and muffler dimensions as the OS Max .12CV
                             90 Day Warranty

FEATURES: ABC construction, aluminum piston with chrome plated brass
            cylinder liner.
          Rotary carb
          Recoil starter
          Ball bearing supported crankshaft
          Heavy duty con rod
          Side exhaust
          Duratrax Silver Sport glow plug, available separately (DTXG3001)
          Natural aluminum (powder coat) 7-fin cylinder head

INCLUDES: One assembled DTX .18 engine with rotary carb and recoil starter
          One set of instructions with parts list

REQUIRES: Muffler (exhaust system) depending on vehicle
          Air filter
          Fuel filter
          Starting equipment
          Fuel: 5% - 20% nitromethane content

SPECS:   Displacement:  0.18 cu in (3.0cc)
         Weight:        8.64oz (245g)
         Bore:          n/a
         Stroke:        n/a
         Power Output:  n/a
         Practical RPM: n/a
         Crankshaft Thread: 5mm x 14mm
         On-Center Mounting Holes, Front to Rear: 0.43" (11mm)
         On-Center Mounting Holes, Side to Side:  1.24" (31.4mm)
         On-Center Exhaust Mounting Holes:        1.08" (27.5mm)
         Back of engine to front of drive washer: 2.23" (56mm) Excluding Recoil
         Height:                                  3.25" (83.7mm)
         High speed needle: 2 1/2 turns out from closed position
          Low speed needle: Screw in until flush with outside of carb body,
            then screw it in a 1/2 turn.