Duratrax, G-27CX Racing Engine Pull Start

Duratrax Engines

Hobbies R Us

Duratrax Engines

R/C Airplanes

R/C Boats

R/C Cars

Engines

Engine Parts

Fuel

Click Here For Pricing & Stock Availability

DTXG0255   G-27CX Racing Engine Pull Start

TECH NOTES
        This is the Duratrax/Supertigre G-27 Pull Start Racing Engine
                      for the Duratrax Warhead, DTXD68**.

FEATURES: ABC cylinder construction-"A"luminum piston,"B"rass cylinder liner
            that is "C"hrome plated
          Dual ball bearing supported crankshaft
          Dual needle slide valve carburetor
          Machined aluminum red cylinder head
          Rear exhaust
          Three year limited warranty

INCLUDES: Duratrax/SuperTigre G-27 Pull Start Racing Engine

REQUIRES: Fuel: Car fuel blend with 20% nitromethane content (DTXP0720)
          Glow Plug: (DTXG3003)
          Glow starter, plug wrench and track equipment

SPECS:    Displacement: 0.27 cu in (4.4 cc)
          Bore: 0.72 in (18.2 mm)
          Stroke: 0.67 in (17 mm)
          Output: 2.5 hp @ 30,000 rpm
          Practical RPM Range: 3,000-35,000
          Weight: 14.1 oz (400g)

          Distance Between Mounting Holes Same Side: 0.83" (21mm)
          Distance Between Mounting Holes Opposite Side: 1.4" (37mm)
          Height from Bottom of Mounting Tabs/Top of Cylinder Head: 3.6" (92mm)
          Height from Bottom of Crankcase to Top of Cylinder Head: 4.2" (107mm)
          Width at Mounting Tabs: 1.8" (46mm)
          Distance from Pull Start to Front Bearing: 3.3" (84.5mm)
          Distance from Pull Start to End of Crankshaft: 3.9" (99mm)
          Diameter of Exhaust Opening: 0.59" (15mm)
          Diameter of Carburetor Opening: 0.56" (14.2mm)

COMMENTS: This engine is intended for use in the Duratrax Warhead and does not
            include an instruction manual. Refer to engine installation and
            maintenance sections in the Warhead manual.

ACCESSORIES
    THIS IS THE DURATRAX/SUPERTIGRE G-27CX ENGINE FOR THE DURATRAX WARHEAD.
FEATURES: ABC CYLINDER CONSTRUCTION, SLIDE VALVE CARBURETOR, LIGHTWEIGHT HEAD
 DESIGN, PULL STARTER
REQUIRES: FUEL WITH 20% NITRO CONTENT, GLOW PLUG