DTXC2540   DuraTrax   3-Shoe Clutch Kit .12/.16

TECH NOTES
    This Clutch Shoe Kit Provides More Surface Area Than a Two Shoe Design,
       Which Gives You Better Clutch Bell Grip and Improved Acceleration.

INCLUDES: One Flywheel
          Three Clutch Shoes
          Two Clutch Springs
          One Clutch Nut

REQUIRES: Duratrax Ultralite Clutch Bells Only, use DTXC2521 through DTXC2526.

COMMENTS: The replacement shoes for this kit are DTXC2544.
          This clutch system will ONLY work on Kyosho vehicles AFTER
            removing the pull start and moving the engine around a 1/4-1/2"
            toward the rear of the car.  This requires the owner to drill
            new holes for mounting the engine.
          If the customer removes the Recoil Starter, they will need the
           following items to make the engine run.
             OSMG4471  Crankshaft
             OSMG8646  Screw Set
             OSMG6026  Gasket Set
             OSMG4058  Cover Plate
          This clutch system Will NOT Work on the Duratrax Conversions or the
            Duratrax GT-10 OR the Kyosho Rampage Series Kits.
          Additionally, to start the engine, the customer will require:
            HCAP3200  Starter
            HCAP3320  Starter Adapter
          The current clutch kit has a revised clutch nut that eliminates the
            large E-clip.  The E-clip is no longer included in the package, and
            this change has no effect on the attachment or operation of the
            clutch kit.
                                                                          

| Homepage | R/C Cars | Stock Parts | Optional Parts | Batteries | Bearings | Body Accessories | Books & Simulators |
| Chargers | Decals | Electronic Speed Controls | Engines | Engine Parts | Fuel | Glow Plugs | Glue |
| Supplies & Accessories | Hobby Supplies | Lexan Bodies | Motors Electric | Nuts & Bolts |
| Paint, Lexan | Radios | Radio Accessories | Servos | Tires & Wheels |
| Tools | Tools Specialized | Search |