DUB410   Dubro   S10 Square Fuel Tank 10 oz.

TECH NOTES
                This is a 10oz Square Fuel Tank by Du-Bro.

FEATURES: Du-Bro fuel tanks were designed with toughness in mind!
          It will not split or crack from vibration or pressure.
          Can be used with pressurized fuel systems!
          Comes complete with all of the hardware including Du-Bro's one-piece
            clunk with fuel barbs built right on the clunk stem, your fuel
            tubing will not slide off!
          Can be used with either Glo-Fuel or gasoline (must purchase DUBQ0675
            Gasoline Conversion Stopper).
          Protruding front lip protects fuel lines from being crimped.
          Filler cap fits over machined smooth neck of tank...prevents tank
            from splitting and forms a positive leak proof seal.
          Single or twin vent design for custom installation.
          Soft brass tubes for easy bending.
          Clunk fuel pick-up for even fuel flow.
          Detailed assembly instructions with illustrations provided.

INCLUDES: One 10oz Fuel Tank

REQUIRES: Assembly
          Hobby Knife
          Phillips Screwdriver

SPECS:    Capacity: 10oz  (300cc)
          Size-  Height: 2-1/4"
                 Width:  2-9/16"
                 Length: 4-7/8"

COMMENTS: If your tank installation requires the use of gasoline or diesel fuel
            the rubber plug and silicone tubing must be replaced with suitable
            material.
                                                                      

|  Homepage  |  R/C Airplanes  |  Accessories  |  Batteries  |   Chargers  |  Covering  |  Decals  |  Electronic Speed Controls  |  Engines  |

|  Engine Mounts  |  Field Equipment  |  Fuel  |  Fuel Tanks  |  Glow Plugs  |  Glues  |  Landing Gears  |  Nuts/Bolts  |  Paint  |  

|  Paint Supplies  |  Props  |  Push Rods  |  Radios  |  Simulators  |  Spinners  |  Tools  |  Wheels  |  Search  |