DUB205   Dubro   Rod Ends Steel 4-40 (2)

TECH NOTES
                      This is a Rod End set by Dubro.
      These rods work well as tail bracing, flying wires, aileron connectors
         on biplanes, strut bracing, and anywhere a solid wire connection
                                   is needed.

FEATURES: Solid steel construction
          Steel threaded fork for easy adjustments.
          Overall length adjustment by crimping wire where desired.
          Full mounting hardware included.

INCLUDES: Two 12" X 4-40 steel rods
          Four fork rod ends
          Four mounting straps
          Four 4-40 X 1/4" screws
          Four 4-40 nuts

SPECS:    Rod length: 304mm (12")
          Rod diameter: 2.2mm (.088")
          Strap length: 40.7mm (1.602")
          Strap width:  6.5mm (.259")
          Strap thickness: 1.6mm (.065")

COMMENTS: One end of each steel wire includes a threaded fork shaped coupler.
            The other end has a coupler that will slide up and down the wire,
            following the instructions, if you crimp the end of the wire at
            your desired position, you can cut off the excess, and adjust
            the length.

|  Homepage  |  R/C Airplanes  |  Accessories  |  Batteries  |   Chargers  |  Covering  |  Decals  |  Electronic Speed Controls  |  Engines  |

|  Engine Mounts  |  Field Equipment  |  Fuel  |  Fuel Tanks  |  Glow Plugs  |  Glues  |  Landing Gears  |  Nuts/Bolts  |  Paint  |  

|  Paint Supplies  |  Props  |  Push Rods  |  Radios  |  Simulators  |  Spinners  |  Tools  |  Wheels  |  Search  |