DUM1230   Dumas   Chris-Craft Runabout 36"

TECH NOTES
   This is a DUMAS 1/8 scale Replica of the 1930 CHRIS CRAFT RUNABOUT.

FEATURES: Double planked hull with birch plywood and mahogany.
          Complete chrome diecast fitting set.
          Complete running hardware kit with bronze prop.

INCLUDES: One complete instruction manual and plans/setup sheet.
          One sheet of DUMAS/CHRIS CRAFT decals.
          Five assorted size brass hardware tubes.
          Six NO.4 1/2" pan head screws.
          One 18" length of cockpit kit coaming tubing.
          One plexi-glass instrument panel sheet.
          Cast metal navigation lights, ventilators, handles, step plates, rings
            and steering wheel.
          Seventeen diecut plywood formers and frame segments
          Fifty hull planking strips.
          Two hardwood center planking strips
          Thirty sub planking strips.
          Eleven spruce strip/formers
          Fourteen styrene former strips
          One ABS formed seat.
          One floorboard base
          All needed hardware, nuts, bolts, screws, etc.
          Complete running hardware set and rudder/steering assembly.
          Die cast: vents              lifting eyes
                    chocks             hatch handles
                    flagpole           step plates
                    gas cap            steering wheel
                    steering brace     navigation lights
                    instrument panel   windshield support

SPECS:    Length: 36"
          Beam:   10"
          Scale:  1/8th

REQUIRES: Motor: One 5-50 size (15 to 27 turn) with a standard 1/8" shaft
                   or Dumas 6 volt #2004 scale or #2025 high speed motor
          Radio: 2 Channel
          Servo: One Heavy Duty and One Standard
          One 6-cell Battery, Charger and Building Equipment
                                                                  

ACCESSORIES
KIT IS MADE OF BIRCH PLYWOOD AND MAHOGANY.  REQUIRES 2-CHANNEL RADIO, MOTOR,
SPEED CONTROL, BATTERY, CHARGER, AND OTHER BUILDING AND FIELD EQUIPMENT.
URETHANE OR EPOXY PAINT CAN BE USED IF DESIRED. CAN BE POWERED BY A 6V MOTOR
FOR SCALE PERFORMANCE.

|  Homepage  |  R/c Boats  |  Accessories  |  Cables  |  Chargers  |  Speed Controls  |  Engines  |  Props  |  Radio's  |  Search  |