|
Dumas |
Hobbies R Us |
Dumas |
|
|
DUM1232 Dumas Chris-Craft Cobra 27"
TECH NOTES
This is a DUMAS 1/8 scale Replica of the 1955 CHRIS CRAFT COBRA.
FEATURES: Double planked hull with birch plywood and mahogany veneer.
Complete chrome diecast fitting set.
Pre-formed ABS plastic turtle deck, fin, and cockpit.
Complete running hardware kit with bronze prop.
INCLUDES: One complete instruction manual and plans/setup sheet.
One sheet of DUMAS/CHRIS CRAFT decals.
Vacuum formed ABS turtle deck/fin, and cockpit.
Clear lexan windshield.
Eight mahogany frame formers.
Fifty six mahogany deck planking strips.
Twenty eight birch sub-planking sections.
Nine spruce turtle deck stringers.
Three spruce motor mounting/keel blocks
Five Basswood jack staffs.
One Mahogany nose block.
Twelve styrene deck planking sheets and turtle deck seam.
Five assorted size brass hardware tubes.
Six NO.4 1/2" pan head screws.
One 18" length of cockpit kit coaming tubing.
One plexi-glass instrument panel sheet.
Cast metal navigation lights, ventilators, handles, step plates, rings
and steering wheel.
Complete Running Hardware Kit with Bronze Prop. .
SPECS: Length: 27"
Beam: 9 3/4"
Weight: (approx.)
Scale: 1/8th
REQUIRES: Motor: One 550-size (15 to 27 turn) with a standard 1/8" shaft
or Dumas #2004 6V scale or #2025 6V high speed motor
Radio: 2 Channel
Servo: One Heavy Duty and One Standard
One 7.2V 6 Cell Battery, Charger, and Building Equipment
One Heavy Duty Mechanical Speed Control w/Resistor
Or Electronic Speed Control.
ACCESSORIES KIT IS MADE OF BIRCH PLYWOOD AND MAHOGANY VENEER. REQUIRES RADIO, MOTOR, KYOSHO SPEED CONTROL AND RESISTOR, 6CELL BATTERY, AND A CHARGER. IF PAINT IS DESIRED, USE EPOXY OR URETHANE PAINTS (W/ A SUITABLE PRIMER).
| Homepage | R/c Boats | Accessories | Cables | Chargers | Speed Controls | Engines | Props | Radio's | Search |