DYFA1010   Dynaflite   Butterfly Kit .10-.20,99"  

TECH NOTES
                This is a .15 size Butterfly Glider Trainer.

FEATURES: Constructed of balsa and plywood
          2-piece wing for easy transportation
          Flat bottom airfoil for slow, forgiving flight characteristics,
            capable of 12 mph landing speeds
          Simple and quick to build
          Three channel operation (throttle, rudder, elevator)

INCLUDES: Hardware package (hinges, quick connectors, pushrods, misc. screws),
            Full-Size Plans, Photo Illustrated Instructions, All Balsa and
            Plywood to complete the kit,

REQUIRES: Radio: 4 Channel with Three Servos
          Engine: .10-.20 (2-stroke)
          Covering: Two 6 Foot Rolls
          Misc. Items: 4oz Fuel Tank, 2-1/4" Main Wheels, Rubber Bands,
            Building and Starting Equipment, Engine Mount, and Prop.

SPECS:    Wingspan: 99"              Wing area: 916 sq in
          Flying weight: 50 oz       Wing loading: 7.5 oz/sq ft
          Length: 48.5"
          Center of Gravity: 3-3/16" Back From Wings Leading Edge.
          Control Throws:
                         Elevator: 3/4"   Up and Down
          Engine Down Thrust: 3 degrees
          Engine Right Thrust: 3 degrees
          Wing Incidence: +1 degrees
          Stab Incidence: 0 degrees

COMMENTS: The instructions say to use a .10-.15 engine and the box says to use
            a .15-.20 engine.  The plane can uses a .10-.20 engine.
          Per Designer, a thrust master or speed 400 electric would be fine, but
            instructions cover installation so you're on you own for electric.
     
ACCESSORIES
KIT IS CONSTRUCTED OF BALSA AND PLYWOOD AND REQUIRES A .10-.20 2-STROKE ENGINE,
ENGINE MOUNT, 3 CHANNEL RADIO, 2 ROLLS OF COVERING (MODELER'S CHOICE),
 PROP, WHEELS, FUEL TANK, FUEL TUBING, AND MISCELLANEOUS BUILDING AND
FIELD EQUIPMENT. KIT IS UNASSEMBLED.

  |  Homepage  |  ARF  Planes  |  Electric  |  Kits  |  Park Flyers  |  Sailplanes  |  Search  |