DYFA3035   Dynaflite   Giant Super Decathlon Kit 1.08-1.8,89" 

TECH NOTES
  Dynaflite's Super Decathlon is an Easy to Build and Fly, High-Wing Airplane.
     This is for the Intermediate Modeler Making a Good 3rd or 4th Kit.
     This Fun Scale Kit Is An Ideal Way To Get Into Building and Flying
               Large Aircraft Through Loops, Rolls and Spins.

FEATURES: IMAA and IMAC Legal (see COMMENTS) with a 89" Wingspan.
          Crisp Die-Cutting For The All-Wood Parts Ensure Good Fits and Fast
            Assembly.
          Builds As Easily As Most .40 Size Sport Scale Kits, With A Mixture
            Of Sport-Scale and Giant-Scale Building Techniques.
          Three-Piece ABS Cowl and Wheel Pants Add Authentic Contours With
            Minimal Shaping Work.
          Lightweight and Able to Fly With A Wide Range Of Engines.
          Two-Piece Wing Design Using An Aluminum Wing Tube.
          Semi-Symmetrical Selig 8036 Airfoil That Supports Excellent
            Aerobatics As Easily As Stable Low-Speed Handling.
          A Servo Compartment Near the Tail For Use In Counterbalancing Heavy
            Engines.
          A 25cc Gasoline Engine Provides More Than Enough Power for Exciting
            Aerobatics.
          An Authentically Shaped Built-Up Tail Section Made By Laminating
            Five Layers of 1/16" Balsa, Making It Strong But Light-Weight.
          Fully functional, structural wing struts (req'd esp if cloth covered)

INCLUDES: All The Wood To Build The Kit, ABS Cowling and Wheel Pants, Hardware
            Package, Clear Windscreen, Pre-Formed 3/16" Aluminum Landing Gear,
            Full Sized Rolled Plans, Photo-Illustrated Instruction Manual,
            Paper/Aluminum Wing Tube, Nylon Strut Ends, Tailwheel Mounting
            Assembly.

REQUIRES: Engine: 1.08-1.8 (2-stroke) or 1.20-1.60 (4-stroke) Glow Engine or
                  1.5-2.1 c.i. (25cc-35cc) Gasoline Engine (Gas: see COMMENTS)
          Radio:  4+ Channel (see COMMENTS)
          Servos: 6 (5-High Torque 50 oz/in Plus, 1-Standard for Throttle)
          Servo Extension Wire (18"): 2 (2-Ailerons) (kill switch req'd for gas
          Y-Harness: 2 (1-Ailerons, 1-Elevator)
          Receiver Battery: 1000 mAh
          Covering: approx. Five 6 Foot Rolls
           (Recommended Coverite 21st Century Fabric for Best Scale Appearance)
          Paint To Match Covering
          Misc. Items: 16 to 24 oz Fuel Tank, Standard Fuel Tubing, 3-1/4"
            Main Wheels, 1-1/2" Tailwheel, 1/8" & 5/32" Wheel Collars, 3/16"
            Axles, 20 Giant Scale Hinges, 1/4" Foam Rubber, 3" Spinner.
                   *Alum spinner recommended with gas engines.

SPECS:    Wingspan: 89" (2261mm)           Wing Area: 1237 sq in (80 sq dm)
          Weight:  16-18 lbs (7258-8165g)  Wing Loading: 30-33 oz/sq ft
          Length:  69" (1753mm)            Airfoil: Semi-Symmetrical High-Wing
          Center Of Gravity: 3-3/8" Back From Leading Edge Of The Wing
          Control Throws:        High Rate        Low Rate
          Ailerons: Up & Down     1-1/4"            5/8"
          Elevator: Up & Down     1-1/2"              1"
          Rudder:   Left & Right  1-1/2"              1"
          Cowling: Length, Firewall To Front: 6-3/8"
                   Height, Rear At Firewall: 7-7/8"
                   Height At Front: 5-3/4"
                   Width At Rear: 6-3/8"
                   Width At Front: 6-1/8"
          Engine Down Thrust: 5 degrees
          Engine Right Thrust: 2 degrees
          Wing Incidence: -2 degrees
          Stab Incidence: -3.5 degrees

COMMENTS: In Order For This Kit To Be IMAA Legal, The Plane MUST Have:
            5 High Torque Servos (More Than 45 oz/in Torque) For Control
            Surfaces (Standard Servo For The Throttle), Heavy Duty Control
            Horns, and Heavy Duty Hinges.
          If Using a 25cc Gasoline Engine, Modeler Will Also Need To
            Use Two 24" Servo Extension Wires (Because the Rudder and Elevator
            Servos Will Be Mounted In The Tail Section).  With This Engine
            You Will Also Need Approx. 6 oz of Extra Tail Weight.
          For Gasoline Engine, Use Gas Fuel Tubing GPMQ4135 and Gas-Safe Tanks
            (GP big tanks are.) ALSO USE servo operated KILL SWITCH FOR SAFETY.
          For Optional 1/4 Scale Pilot, Use DGAQ2110.
          For Optional Cockpit Kit, Use DYFQ8115.
          There are no decals included with this kit.               

ACCESSORIES
KIT IS CONSTRUCTED OF BALSA AND PLY AND COMES W/PLASTIC COWL & CLEAR WINDSHIELD
REQUIRES: 4-CHANNEL RADIO W/6 SERVOS, 1000MAH BATT, 1.08-1.8 (2-STROKE) 1.2-1.6
(4-STROKE) OR 1.5-2.1 CI GAS ENGINE, ALL PRIMARY ITEMS, 5 ROLLS OF COVERING,
PAINT, AND BUILDING AND FIELD EQUIPMENT.  THIS ACG IS SET UP FOR GLOW ENGINE
USE.      KIT IS PICTURED ON BOX W/YELLOW AND WHITE COLOR SCHEME.

  |  Homepage  |  ARF  Planes  |  Electric  |  Kits  |  Park Flyers  |  Sailplanes  |  Search  |