EFL4075   Eratix 3D 25e ARF 

Key Features

Capable of sport-to-extreme 3D aerobatics
Generous wing area & light wing load for superb slow flight response
Specially-designed, machined, aluminum, 3D control horns
Lightweight, open-structure airframe design
Top quality, laser-cut balsa and lightweight plywood materials
Firewall accepts E-flite® Power 25 or Power 32 brushless motors without modification
Tough, lightweight aluminum landing gear with factory-painted fiberglass wheel pants
Factory-painted fiberglass cowl
Easy-access magnetic battery hatch
Ground clearance optimized for a wide range of prop sizes
Steerable tail wheel
 

Overview

The E-flite Eratix 3D 25e ARF is a 3D-capable sport plane designed to make the transition 
from sport models to more challenging 3D aircraft a lot less demanding. Its large wing area 
and light wing loading offer very forgiving flight characteristics, especially in slow flight. 
It’s also compatible with a range of motor and propeller sizes so you can fine tune the power 
and performance to your skill level. Both the E-flite Power 25 and Power 32 brushless outrunner 
motors bolt to the firewall without any modifications. Experienced 3D pilots will appreciate 
the uniquely designed, machined aluminum 3D control arms that can handle the rigors of 
high-torque mini servos and large control throws. Sport aerobatics or stick-bending 3D, 
the Eratix 3D 25e is up for whatever you are.

Specs
 

Wing Span: 54 in (1370mm) 
Overall Length: 53 in (1350mm) 
Wing Area: 695 sq in (44.9 sq dm) 
Flying Weight: 3.75-4 lb (1.7-1.8 kg) 
Motor Size: Power 25 or 32 required 
Radio: 6+ channels 
Servos: 4 metal gear mini 
Trim Scheme Colors: UltraCote Lite White (HANU973), Fluorescent Orange (HANU895), Fluorescent 
Blue (HANU896), and Clear (HANU964) 
CG (center of gravity): 3.75-4 in (80-100mm) from leading edge 
Prop Size: 13 x 6.5E, 14 x 7E, or 15 x 8E depending upon which recommended setup you choose 
Hardware Included: Yes 
Speed Control : 60A ESC (EFLA1060) 
Recommended Battery: 3S 11.1V 4200mAh or 4S 14.8V 3850mAh Li-Po (THP42003S2PPL or THP38504SX) 
Control Throw (Ailerons): High Rate: 3 in (75mm) up and down; Low Rate: 1 in (25mm) up and down 
Control Throw (Elevator): High Rate: 3.5 in (90mm) up and down; Low Rate: 1 in (25mm) up and down 
Control Throw (Rudder): High Rate: 4.5 in (115mm) left and right; Low Rate: 2 in (50mm) left 
and right 

Needed to Complete

In order to get your Eratix 3D 25e ARF airborne, you will need the following items:

Radio System: 6+ channels 
Servo: 4 mini metal gear servos 
Motor: Power 25 or Power 32 motor
Speed Control: 60-Amp ESC 
Prop: 13 x 6.5E, 14 x 7E or 15 x 8E, depending upon the motor selected  
Battery: 3S 11.1V 4200mAh or 4S 14.8V 3850mAh Li-Po 

|  Homepage  |  Free Flight Airplanes  |  Electric Free Flight  |   Gas & Free Flight Accy's  |  Search  |