ERN122   Ernst   Adjustable 4-Stroke Mount .60 FS

TECH NOTES
  This is a motor mount for the HP 21-25 FS and O.S. 20FS

INCLUDES:  1- Square glass filled motor mount
              1 17/64" or 1.265625" or 32mm at narrowest inside width
              1 6/8" or 1.75 or 44.5mm at widest inside width
           1- 3/32" allen wrench
           4- 27/64" X 5/8" Phillip head self tapping screws
           2- 4/40 hex head screws with 2 washers and 2 nuts to adjust the mount

SPECS:  Length of the mounting beam is 2 25/64" or 2.390625" or 61mm
        Width of the mounting beam is 29/64" or .453125" or 11.5mm
        Height of the beam in the back portion of the mounting surface is
          29/64" or .453125" or 11.5mm
        Height of the beam in the front portion of the mounting surface is
          1/2" or .5" or 12.5mm
COMMENTS:  Customer needs to drill the holes for the engine

|  Homepage  |  R/C Airplanes  |  Accessories  |  Batteries  |   Chargers  |  Covering  |  Decals  |  Electronic Speed Controls  |  Engines  |

|  Engine Mounts  |  Field Equipment  |  Fuel  |  Fuel Tanks  |  Glow Plugs  |  Glues  |  Landing Gears  |  Nuts/Bolts  |  Paint  |  

|  Paint Supplies  |  Props  |  Push Rods  |  Radios  |  Simulators  |  Spinners  |  Tools  |  Wheels  |  Search  |