FJIG0234     BF-34EI 34cc/2.1CI 4-Stroke Gas Engine 

TECH NOTES

This is the gasoline powered Fuji Imvac 2.1 cu inch (34cc)
EIS 4-Stroke Engine.

FEATURES: New Four-Stroke Design for more reliability and starting ease
CNC machined parts
Head up mounting only. (no side or inverted mounting)
EIS (Electronic Ignition System)
Parts are lubricated by a constant flow of ultra-low-viscosity Fuji
0W20 100% synthetic oil from a pan on the bottom of the engine
Walbro butterfly-type carburetor, fine tuning the Idle, Low, and High
Speed screws can be accomplished in a few seconds with only a
slotted screwdriver (FJIG3290)
Ball bearing-supported crankshaft
True chrome-plated cylinder
Direct R/C specific throttle linkage setup
Custom firewall mounting system
Can be identified by the BF-34EI nameplate on the Rotor
No break-in required
3-YEAR limited warranty for US and Canada

INCLUDES: One Fuji Imvac 2.1 cu in (34cc) 4-stroke engine with Champion RCJ6Y
or NGK CMR6A Spark plug FJIG7475, muffler FJIG6095, mounting
hardware, 30mm prop flange, M13x16 box spanner FJIG3730, 4mm hex
wrench, 100cc fuel bottle, and instruction manual

REQUIRES: Regular unleaded gasoline, propeller, engine ON/OFF switch
EIS battery    FJIP9925
Two-cycle oil  FJIP9911

SPECS:    Height: Oil Pan to Rocker Cover 8" (203mm)
Width: 6¾" (171mm)
Weight: 4.9lbs (2.0kg)
Distance from firewall to prop rotor: 6" (152mm)
Muffler exhaust outlet diameter: 9mm inner, 11mm outer
Distance across mounting screws on motor mount: 95mm
Distance top and bottom mounting screws:        75mm
Displacement: 2.1 cu in (34cc)
Bore/Stroke: 39x28mm
Spinner Bolt: 3/8-16 threaded 13mm hex
Practical RPM: 1000-7500
Brake Horsepower: 2hp @ 7500 RPM
Peak Torque: .20kgm @ 5,000 RPM
Default carb settings: High Speed 1¾ to 2 turns OUT
Low Speed    1-1/3 turns OUT
Recommended Propeller: 22x6-10 (TOPQ5241)

COMMENTS:
The replacement EI unit is FJIG1001

Fuji Imvac is NOT related to the original Fuji Engines sold by MECOA.

ACCESSORIES

THIS IS THE FUJI BF-34EI FOUR CYCLE GASOLINE ENGINE.
FEATURES: EIS IGNITION SYSTEM W/RPM SENSOR TO ADJUST TIMING, WALBRO BUTTERFLY
CARB, CHROME PLATED CYLINDER, R/C THROTTLE SETUP, CUSTOM FIREWALL MOUNTING
SYSTEM, DYNAMICALLY BALANCED ROTOR, HUB & CRANKSHAFT
REQUIRES: PROPELLER, FUEL AND IGNITION BATTERY