FULRF500   Fults   Dual Strut Nosegear .90 5"

TECH NOTES
  This is a Dual Strut Nosegear with 5" Strut.  This comes with the equipment
to make it a steerable gear. The strut is constructed of high tensil strength
music wire and is designed for models weighing up to 6lbs. This has an extra
large pivot shaft which provides a stronger support for the larger dual strut
and increases the overall performance to the nose gear.

INCLUDES: One Dual Strut
          One Axle
          Four 4-40 Blind Nuts
          Four 4-40 3/4" Screws
          Four Lock Washers
          Two Nylon Pivot Blocks
          One Nylon Steering Arm & Set Screw
          One Cam Bushing
          One Allen Wrench
          One Instruction Sheet
          Three Set Screws
          One Large Nylon Spacer
          One Bronze Wheel Collar

SPECS:    Strut length: 5"
          Diameter: 5/32"
          Overall Length: 9"
          Steering Arm Length: 1-11/16"

REQUIRES: Nothing

COMMENTS: This can be used with up a to a 4" wheel and this is probably best
            for an airplane using a .60-.90 size engine.
                                                                   

|  Homepage  |  R/C Airplanes  |  Accessories  |  Batteries  |   Chargers  |  Covering  |  Decals  |  Electronic Speed Controls  |  Engines  |

|  Engine Mounts  |  Field Equipment  |  Fuel  |  Fuel Tanks  |  Glow Plugs  |  Glues  |  Landing Gears  |  Nuts/Bolts  |  Paint  |  

|  Paint Supplies  |  Props  |  Push Rods  |  Radios  |  Simulators  |  Spinners  |  Tools  |  Wheels  |  Search  |