FULRF710   Fults   Dual Strut Nosegear 7" 

TECH NOTES
This is a Dual Strut nosegear with 7" strut.  This comes with the equipment to
make it a steerable gear.  The strut is constructed of high tensil strength
music wire and is designed for models weighing up to 15lbs.  This has an extra
large pivot shaft which provides a stronger support for the larger dual strut
and increases the overall performance to the nose gear.

INCLUDES:  1 dual strut                   2 nylon bushings
           1 axle                         3 set screw
           4 4-40 blind nuts              2 nylon bushing to go on the axle
           4 4-40 3/4" screws             1 large nylon spacer
           4 lock washers                 1 instruction sheet
           2 nylon pivot blocks
           1 nylon steering arm & socket head set screw
           4 nylon spacer (optional: consult instructions)
           1 wheel collar
           2 allen wrenches
                                                                   

SPECS:   Strut length: 7"       Axle length:  2 1/8"
         Diameter: 3/16"             Dia: 1/8"
         Overall length: 11 3/4"
         Steering arm length: 1 3/4"

REQUIRES: nothing

COMMENTS:  This can be used with up a to a 5" wheel and this is probably best
              for an airplane using a .60 to .90 engine.
                                                                    

|  Homepage  |  R/C Airplanes  |  Accessories  |  Batteries  |   Chargers  |  Covering  |  Decals  |  Electronic Speed Controls  |  Engines  |

|  Engine Mounts  |  Field Equipment  |  Fuel  |  Fuel Tanks  |  Glow Plugs  |  Glues  |  Landing Gears  |  Nuts/Bolts  |  Paint  |  

|  Paint Supplies  |  Props  |  Push Rods  |  Radios  |  Simulators  |  Spinners  |  Tools  |  Wheels  |  Search  |