FUTJ66    7CAP PCM R168DP 2 S3151 75MHZ

TECH NOTES
This is the Futaba 7CAP 7-Channel 75MHz Computer Radio
with the R168DP 8-Channel PCM Receiver and two S3151 Digital Servos.

FEATURES: This is the 75MHz (channels 61-90) ground frequency version of the
7CAP aircraft system
This version is not intended for aircraft usage and is primarily
intended for robots and multi-function R/C vehicles such as semi
trucks and tanks requiring several channels for lights, gear
shifting, gun operation and more
For the 72MHz (channels 11-60) version with four S3151 servos, order
FUTJ67**
10-model memory and 6-character model naming
Same Dial n' Key programming found on Futaba's 9C systems
Basic menu for everyday operation, Advanced menu for more
complicated needs
Control layouts in FM or PCM
Mode Select feature
Fail Safe (in PCM mode only)
Adjustable throttle cut
Throttle curve normal (5 points)
Pitch curve normal (5 points)
Three programmable mixes
VR switch controls proportional 7th channel
EEPROM memory feature retains settings even when transmitter battery
is disconnected or removed
Stick Mode Select Feature-IMPORTANT, For full mode changes,
transmitter must be sent to the Futaba Service Center
Dual Rates on 4 Channels
Triple rates available if using the 3 position switch
Full function micro (square) trainer system, use FUTM4415
or FUTM4420 (training system only works in FM mode)
One year limited warranty

INCLUDES: One Futaba 7CAP 7-Channel Surface Radio with
Two S3151 Digital Servos, FUTM0310
R168DP PCM receiver, FUTL0807
600mAh NT8S600B TX battery, FUTM1457
NR-4J 4.8V, 600mAh Receiver Battery, FUTM1280
FBC-19B (4) Wall charger, FUTM1830
Switch Harness, FUTM4370
9" (229mm) Servo Extension, FUTM3910
Black Neck Strap: FUTM5690
Transmitter and receiver crystals
Servo accessory bag, frequency flag set and instruction manual

REQUIRES: Charging batteries overnight before use

SPECS:    Transmitter:
Transmitting Frequency: 75MHz band
Modulation: FM/PPM or PCM, switchable
Power Supply: 9.6V NT8S600B NiCd battery
Current Drain: 250mA

FP-R168DP PCM Dual Conversion Receiver:
Receiving Frequency: 75MHz band
Intermediate Frequency:
Power Requirement:
Current Drain:
Size: 1.1 x 2.2 x 0.8" (28.5 x 55.5 x 19.8mm)
Weight: 1oz (28g)

S3151 Standard Size Digital Servo:
Control System: Pulse width control, 1.52ms neutral
Power Requirement: 4.8V
Output Torque: 43 oz-in (3.1 kg-cm) at 4.8V
Operating Speed: 0.21 sec/60° @ 4.8V
Size 1.59"x0.79"x1.42" (40.5x20x36.1mm)
Weight: 1.48oz (42g)

COMMENTS: For additional helpful information, consider purchasing the
Traplet Publications Futaba 7C The User's Guide, TPNZ1007.

ACCESSORIES
					

THIS IS THE FUTABA 7CAP PCM 75MHZ COMPUTER RADIO WITH R168 DP RECEIVER &
TWO S3151 DIGITAL SERVOS
FEATURES: FOR ROBOT, SEMI TRUCK OR TANK SURFACE USAGE ONLY

|  Homepage  |  Crystals  |  Flight Packs  |  Radio Accessories  |  Radio's  |  Receivers  |  Servo's  |   Search  |