FUTJ9205     12FG Air PCM 50MHz w/R5114DPS Rx Mode 2 

TECH NOTES

This is the 50MHz Futaba 12FGA Computer Radio on Mode 2 with the
R5114DPS Synthesized 14-Channel Receiver.
Does not include servos.

This is the airplane version which will default to airplane settings
when powered up and has a ratcheted throttle stick.

**Additional Technical Info Will Be Added When It Becomes Available.**

The Futaba 12FGA shares many features with the 14MZ such as
Real-Time Response with 2048PCM,
Fully Synthesized Receiver that operates in either Mode A (standard Mode)
or Mode B (new Mode),
Servo Grouping, Variable Dual Rates and
Quad-Bearing Gimbals

FEATURES:
PCM G3 2048 resolution is "backwards compatible" with 1024 PCM, and
FM/PPM
10 free (user programmable) mixes
24 preset model types, 8 heli swash types and 16 model types for
fixed wing aircraft
6 types of no tail wing (winglet) in each airplane and glider
Supports eight flight conditions (seven plus the default)
FLASH-ROM memory for up to thirty models
1882 model memory available with optional 1GB SD Card
available separately,
Six factory-set Variable Dual Rate (VDR) curves can be assigned to
any function in any flight condition configuration
Variable Dual Rates (VDR) and Expo can be combined so they are
automatically activated when a function is activated, no program
mixing required
Dual Antenna Diversity (DAD)
"Full Functionality" trainer system
255 x 96 LCD with adjustable contrast
7.2V 1700mAh NiMH transmitter battery
R5114DPS Receiver;
Operates in either Mode A (standard Mode) or if flying a model
that generates a lot of RF interference or if flying in an area
where interference may occur Mode B (new Mode) may be selected
By using state-of-the-art Ball Grid Array (BGA) layered PC board
technology, this 14-channel synthesized receiver is the world's
smallest. All pilots will appreciate how easy its
WFSS (Wireless Frequency Setting System) makes changing
frequencies at busy airfields. It can be done right from the
transmitter without changing crystals.
Servo Grouping;
Multiple servos controlling a single function can be set up
through the transmitter and then plugged into differently
adjustable receiver channels (even non-consecutively) without
needing a separate servo synchronizer for mixing. Each servo's
EPA can be adjusted individually from the transmitter-no separate
servo synchronizer requires for mixing
Quad-Bearing Gimbals for smoothest motion and response, stick tension
and detent are adjustable
Front mounted slider switches for easier access
Seven color LED indicator

INCLUDES: 12FGA Synthesized Transmitter (not available separately)
50MHz Module
R5114DPS 50MHz Receiver (FUTL7710)
7.2V 1700mAh NiMH Transmitter Battery (FUT-----)
Battery Charger (FUT-----)
NiCd 1500mAh 4.8V Receiver Battery (FUTM----)
Heavy Duty Switch Harness (FUTM----)
Woven Orange Neck Strap (FUTM5693)
Instruction Manual

REQUIRES: Charging batteries before use
Servos of modeler's choice, suggested servos for use with the 12FGA
include the Futaba S9154 Digital High Speed Servo (FUTM0214) and
the Futaba S9255 Hi-Torque Heli Digital Servo (FUTM0225)

SPECS:    Transmitter;
Operating System: 2-stick, 12 channels, PCM-G3 synthesizer system
Modulation: PCM-G3, PCM 1024, or FM/PPM switchable
Power Supply:
Current Drain:

R5114DPS Receiver;
Receiving Frequency: US only 72 or 50MHz bands
Intermediate Frequency: 10.7MHz & 450kHz
Power Requirement: 4.8V NiCd battery
Current Drain: 75mA
Size: 2" x 1.5" x .65" (52mm x 37.5mm x 16.5mm)
Weight: 1.16oz (33g)

COMMENTS: Available in Mode 1 or Mode 2, for airplanes and helis, on 72MHz and
50MHz
FUTJ9200 Airplane 72MHz Mode 2
FUTJ9201 Heli     72MHz Mode 2
FUTJ9205 Airplane 50MHz Mode 2
FUTJ9206 Heli     50MHz Mode 2
FUTJ9210 Airplane 72MHz Mode 1
FUTJ9211 Heli     72MHz Mode 1

|  Homepage  |  Crystals  |  Flight Packs  |  Radio Accessories  |  Radio's  |  Receivers  |  Servo's  |   Search  |