FUTK50   6EXAS PCM R146iP 2-S3114 

TECH NOTES
This is the Futaba 6EXA Super 6 channel PCM Computer Radio System
with R146iP micro Receiver and two S3114 micro size Servos.
This system is ideal for Park Flyers and the 3D flat competition foam
aircraft with Brushless motors.
***This Radio has PCM Capabilities***
***THIS RADIO CONTAINS NO HELI PROGRAMMING***

Here are the differences between the 6EXA and 6EXAS:

1.  The front panel is manufactured differently.
2.  The LCD is different.
3.  You can name your models up to 4 characters.
4.  It has aileron differential.
5.  It has flap trim.
6.  It has adjustable mixing rates on V-Tail and elevon.
7.  It has adjustable mixing positions for throttle cut.
8.  It can be switched from FM to PCM.
9.  It has Failsafe in PCM mode only.

This radio is diode protected to prevent overcharging, which means the
battery cannot be discharged through the transmitter.

FEATURES: Six model memory with four character model naming
Standard programming features include all channel servo reversing,
End point adjustment (EPA) on all channels, dual rates, exponential
flaperon, V-tail, elevon, and wing type selection
Transmitter controls include Throttle Cut Switch-stops engine
when flipped twice within one second, Trainer Switch-controls link
between instructor and student transmitters, Retract Switch-
controls operation of retractable landing gear or other feature,
Dual Rate Switch-reduces servo travel and switches' exponential
curve
Flap dial control allows fine tuning of flap servo to slow airplane
when coming in for a landing
Adjustable flaperon rates
Adjustable stick length
Digital Trims
Modulation PCM/PPM (FM) selectable
Trainer box capable (trainer cord sold separately, see COMMENTS).

INCLUDES: One Futaba 6EXA Super Computer Radio system with:
Transmitter Crystal
R146iP Micro Receiver with crystal FUTL0601
Two S3114 micro servos             FUTM0414
NT8F600B Transmitter battery       FUTM1440
FBC-19B (4) Charger                FUTM1830
SWH-13 Switch Harness              FUTM4370
ANT-5 Transmitter Antenna          FUTM5040

SPECS:    Receiver-R146iP, FUTL0601
Type: Single conversion
Length: 28.7mm (1.12")
Width:  42.7mm (1.68")
Height: 20mm (.079")
Weight: 16.5 grams (.58 ounces)
Receiving range: 300 meters (984 feet) Range will differ with the
surroundings
Power requirement: 4.8V-6V
S3114 Servo
6V                          4.8V
Torque: 23.5 oz-in  (1.7 kg-cm)     20.8 oz-in (1.5 kg-cm)
Speed:  0.09 sec/60°               .10 sec/60°
Dimensions: .86 x .43 x .78" (21.8 x 11 x 19.8mm)
Weight: .27 oz (7.8g))
Lead Length: 6.5" (165mm) grams)
Servo horn length at longest point:  0.90" (23mm)
Servo horn length at shortest point: 0.62" (16mm)
Connector: Male "J" type with approx. 5" (126mm) wire

COMMENTS: If using as a trainer radio, one of the following trainer cords will
be needed;
9C to FM-FUTM4420 trainer cord to connect to standard trainer port
9C to 9C-FUTM4415 trainer cord when using a 9C or another 6EXA

|  Homepage  |  Crystals  |  Flight Packs  |  Radio Accessories  |  Radio's  |  Receivers  |  Servo's  |   Search  |