FUTK51   6EXAS FM R156F Micro 3-S3114

TECH NOTES
       This is the Futaba 6EXA Super 6 channel PCM Computer Radio System
        with R156F 6ch micro Receiver and three S3114 micro size Servos.
          This system is ideal for Park Flyers and Slow Fly models.
                  ***This Radio has PCM Capabilities***
                ***THIS RADIO CONTAINS NO HELI PROGRAMMING***

Here are the differences between the 6EXA and 6EXAS:

1.  The front panel is manufactured differently.
2.  The LCD is different.
3.  You can name your models up to 4 characters.
4.  It has aileron differential.
5.  It has flap trim.
6.  It has adjustable mixing rates on V-Tail and elevon.
7.  It has adjustable mixing positions for throttle cut.
8.  It can be switched from FM to PCM.
9.  It has Failsafe in PCM mode only.

    This radio is diode protected to prevent overcharging, which means the
          battery cannot be discharged through the transmitter.

FEATURES: Six model memory with four character model naming
          Standard programming features include all channel servo reversing,
            End point adjustment (EPA) on all channels, dual rates, exponential
            flaperon, V-tail, elevon, and wing type selection
          Transmitter controls include Throttle Cut Switch-stops engine
            when flipped twice within one second, Trainer Switch-controls link
            between instructor and student transmitters, Retract Switch-
            controls operation of retractable landing gear or other feature,
            Dual Rate Switch-reduces servo travel and switches' exponential
            curve
          Flap dial control allows fine tuning of flap servo to slow airplane
            when coming in for a landing
          Adjustable flaperon rates
          Adjustable stick length
          Digital Trims
          Modulation PCM/PPM (FM) selectable
          Trainer box capable (trainer cord sold separately, see COMMENTS).

INCLUDES: One Futaba 6EXA Super Computer Radio system with:
          Transmitter Crystal
          R156F Micro Receiver with crystal  FUTL0641
          Three S3114 micro servos           FUTM0414
          NT8F600B Transmitter battery       FUTM1440
          FBC-19B (4) Charger                FUTM1830
          SWH-13 Switch Harness              FUTM4370
          ANT-5 Transmitter Antenna          FUTM5040

SPECS:    Receiver-R156F, FUTL0641
            Narrow Band: 20kHz Single conversion
            Power Requirements: 4.8 to 6.0V (shared with servos)
            Current Drain: 10mA.68")
            Length: 1.3"  (33.3mm)
            Width:  0.51" (13mm) (.58 ounces)
            Height: 0.84" (21.4mm) (984 feet) Range will differ with the
            Weight: 0.36oz (10.2g)

          S3114 Servo
                    6V                          4.8V
            Torque: 23.5 oz-in  (1.7 kg-cm)     20.8 oz-in (1.5 kg-cm)
            Speed:  0.09 sec/60°               .10 sec/60°
            Dimensions: .86 x .43 x .78" (21.8 x 11 x 19.8mm)
            Weight: .27 oz (7.8g))
            Lead Length: 6.5" (165mm)
            Servo horn length at longest point:  0.90" (23mm)
            Servo horn length at shortest point: 0.62" (16mm)
            Connector: Male "J" type with approx. 5" (126mm) wire

COMMENTS: If using as a trainer radio, one of the following trainer cords will
           be needed;
           9C to FM-FUTM4420 trainer cord to connect to standard trainer port
           9C to 9C-FUTM4415 trainer cord when using a 9C or another 6EXA

|  Homepage  |  Crystals  |  Flight Packs  |  Radio Accessories  |  Radio's  |  Receivers  |  Servo's  |   Search  |