FUTK52**   Futaba   6EXAS 6-Channel Super FM/3 S3101 Servos

TECH NOTES
       This is the Futaba 6EXA Super 6 channel FM Computer Radio System
         with R156F micro Receiver and three S3101 micro size Servos.
           This system is designed for the first time glider pilot
                    that prefers a computer style radio.

                ***THIS RADIO CONTAINS NO HELI PROGRAMMING***

    **Additional Technical Info Will Be Added When It Becomes Available**

FEATURES: Six model memory with four character model naming
          Standard programming features include all channel servo reversing,
            End point adjustment (EPA) on all channels, dual rates, exponential
            flaperon, V-tail, elevon, and wing type selection
          Transmitter controls include Throttle Cut Switch-stops engine
            when flipped twice within one second, Trainer Switch-controls link
            between instructor and student transmitters, Retract Switch-
            controls operation of retractable landing gear or other feature,
            Dual Rate Switch-reduces servo travel and switches' exponential
            curve
          Flap dial control allows fine tuning of flap servo to slow airplane
            when coming in for a landing
          Adjustable flaperon rates
          Adjustable stick length
          Trainer box capable (trainer cord sold separately, see COMMENTS).

INCLUDES: One Futaba 6EXA Super Computer Radio system with:
          R156F Micro Receiver               FUTM0641
          Three S3101 micro servos           FUTM0033
          One bag servo mounting hardware
          NT8F600B Transmitter battery       FUTM1440
          FBC-19B (4) Charger                FUTM1830
          SWH-13 Switch Harness              FUTM4370
          ANT-5 Transmitter Antenna          FUTM5040

REQUIRES:

SPECS:    Receiver-R156F
            Type: Dual conversion
            Power requirement:
            Current drain:
            Length:
            Width:
            Height:
            Weight:
         Servos- (3) S3101
            Speed: .18sec/60 deg @ 4.8V -  .14sec/60 deg @ 6V
            Torque: 35 oz-in @ 4.8V - 43 oz-in @ 6V
                    2.5 kg/cm @ 4.8V - 3.1 kg/cm @ 6V
            Length: 1.1" (28mm)
            Width:  0.5" (13mm)
            Height: 1.2" (30mm)
            Weight: 0.6 ounce (17 grams)
            Connector: "J" type with about 5" wire

COMMENTS: If using as a trainer radio, one of the following trainer cords will
           be needed;
           9C to FM-FUTM4420 trainer cord to connect to standard trainer port
           9C to 9C-FUTM4415 trainer cord when using a 9C or another 6EXA

|  Homepage  |  Crystals  |  Flight Packs  |  Radio Accessories  |  Radio's  |  Receivers  |  Servo's  |   Search  |