FUTK64     6EXP Air/Heli R168DF 4-S3004 72MHz 

TECH NOTES

This is the Futaba 6EXP 6 channel FM Computer Radio System
with programming for Airplane and Helicopter use.
Includes the R168DF 8-Channel FM Receiver and 4 S3004 Ball Bearing Servos.

**Additional Technical Info Will Be Added When It Becomes Available.**

This radio is diode protected to prevent overcharging, which means the
battery cannot be discharged through the transmitter.

AIRPLANE FEATURES:
Standard programming features include all channel servo reversing,
End point adjustment (EPA) on all channels, dual rates, exponential
flaperon, V-tail, elevon, and wing type selection
Transmitter controls include Throttle Cut Switch-stops engine
when flipped twice within one second, Trainer Switch-controls link
between instructor and student transmitters, Retract Switch-
controls operation of retractable landing gear or other feature,
Dual Rate Switch-reduces servo travel and switches' exponential
curve
Flap dial control allows fine tuning of flap servo to slow airplane
when coming in for a landing
Adjustable flaperon rates
HELICOPTER FEATURES:
Multiple swash plate styles, data reset, trainer capability, EPA,
exponential and digital trims
Data Input Lever allows easy setting of end points and rates for all
six channels
Five-point adjustment with two curves on both Throttle Curve, Pitch
Curve, Normal and Idle Up
Rate selection on both gyro mixing and revo mixing
Throttle Hold switch for performing autorotation maneuvers and
reducing idle for starting
GENERAL FEATURES:
Six model memory, four character model naming
Small speaker in face plate emits audio alarms
Adjustable stick length
Digital Trims
Modulation PCM/PPM (FM) switchable
Trainer box capable (trainer cord sold separately, see COMMENTS).

INCLUDES: One Futaba 6EXP Super Computer Radio system with:
Transmitter Crystal
R168DF 8-Channel Receiver with crystal  FUTL0832
Four S3004 Servos                  FUTM0004
NT8F600B Transmitter Battery       FUTM1440
NR4S250 250mAh Receiver Battery    FUTM1215
FBC-19B (4) Charger                FUTM1830
SWH-13 Switch Harness              FUTM4370
ANT-5 Transmitter Antenna          FUTM5040

SPECS:    Receiver-R168DF, FUTL0832
Type: Dual conversion
Dimensions: 1.1 x 2.2 x 0.8" (28.5 x 55.5 x 19.8mm)
Weight: 1.0oz (28g)
Transmitter-

S3004 Servo-
Speed:  0.23 sec/60° @ 4.8V
0.19 sec/60° @ 6.0V
Torque:  44 oz-in (3.2 kg-cm) at 4.8V
57 oz-in (4.1 kg-cm) at 6.0V
Length: 1.6" (41mm)
Width:  0.8" (20mm)
Height: 1.4" (36mm)
Weight: 1.3 ounce (37.2 grams)
Connector: "J" type with approx. 5" wire

COMMENTS: If using as a trainer radio, one of the following trainer cords will
be needed;
9C to FM-FUTM4420 trainer cord to connect to standard trainer port
9C to 9C-FUTM4415 trainer cord when using a 9C or another 6EXP

|  Homepage  |  Crystals  |  Flight Packs  |  Radio Accessories  |  Radio's  |  Receivers  |  Servo's  |   Search  |