FUTS136G   Futaba   S136G Servo Compact Retract

TECH NOTES
         The S136G Compact Landing Gear Retract Servos are extra-flat
                        so they will fit into a wing.

FEATURES: Two Ball Bearings
          Metal Gear Set
          Compact Size
          Travels 180 degrees - full-lock to full-lock -- to hold your gear in
            position securely. Not proportional. Perfect for mechanical
            retract installation. (see COMMENTS)
          One-Year Warranty.

INCLUDES: One S136G Compact Retract Servo w/ J Connector

SPECS:    Length: 1.78"
          Width:  0.89"
          Height: 1.00"
          Torque: 76.4 oz in
          Transit Time: .50 seconds/60 degrees (it actually travels 180
            Degrees see COMMENTS)
          Weight: 1.48 oz

COMMENTS: A retract servo is a very specialized servo. It is non-proportional,
            going 180 degrees, "lock to lock". They are specifically made for
            mechanical retracts to lock the gear in the up and down positions.
            and DO NOT have any means of end point adjustment and can not be
            adjusted by ATV on a transmitter. They are only able to go 180
            degrees and provide full maximum available torque at the two end
            points. This is their whole purpose and intentional design, but if
            someone has a unique design situation where they need other than
            180 degrees available, they must use a proportional servo, not a
            retract servo. They are specifically designed to withstand constant
            holding loads in the up and down positions, unique to the use of
            mechanical retracts.
            Pneumatic retracts do not need a retract servo. A proportional
            standard or mini servo is used to move the air valve back and forth

|  Homepage  |  Batteries  |  Crystals  |  Flight Packs  |  Radio Accessories  |  Radio's  |  Receivers  |  Servo's  |   Search  |