FUTS3003   Futaba   S3003 Servo Standard 

TECH NOTES
    This is the Futaba S3003 Standard Servo that replaces the S148 servo.
 This basic servo is used in cars, boats, or where standard servos are used.

INCLUDES: One S3003 standard servo with preinstalled round servo horn(FSH6W)
          Four brass eyelets
          Four black rectangle rubber grommets
          Four servo mount screws
          One large round horn
          One large X horn
          One small X horn

SPECS:    Speed:     0.23sec/60 degrees   at 4.8V
          Torque:    44.4 oz/in (3.2kg/cm) at 4.8V
          Size:      1.59"L x 0.78"W x 1.42"H (40.4x19.8x36mm) w/o output shaft
          Weight:    1.31 oz (37.2g)
          Connector: "J" type with approx. 5" lead

|  Homepage  |  Batteries  |  Crystals  |  Flight Packs  |  Radio Accessories  |  Radio's  |  Receivers  |  Servo's  |   Search  |