|
Futaba |
Hobbies R Us |
Futaba |
|
|
FUTS3004 Futaba S3004 Servo Standard Ball Bearing
TECH NOTES
This is the Futaba S3004 Light Weight, Ball Bearing Servo.
This basic servo is used in cars, boats, or where standard servos are used.
Note: This servo is not designed for use with glow-powered helicopters.
FEATURES: Single ball bearing on output shaft.
Precise tight fit throughout the gear train.
Being standard size and light weight, it fits many applications.
INCLUDES: One S3004 standard servo with preinstalled round servo horn(FSH6W)
Four brass eyelets
Four black one-piece rectangle rubber grommets
Four servo mounting screws
Three servo horns (1 lg. round, 1 lg."X" and 1 sm. "x")
SPECS: Speed: 0.23 sec/60 degrees at 4.8V
0.19 sec/60 degrees at 6.0V
Torque: 44.4 ounces-inches (3.2kg-cm) at 4.8V
56.9 ounces-inches (4.1kg-cm) at 6.0V
Length: 1.59" (40.4mm)
Width: 0.78" (19.8mm)
Height: 1.42" (36mm)
Weight: 1.30 ounce (38 grams)
Connector: "J" type with approx. 5" wire
COMMENTS: inch (millimeters) ## .60(15) flange to
Side view: 1.42(36) __¦--------¦__ top of
bottom to top ¦ ¦ shaft
of case (not ¦ ¦ 1.0(25) flange to
output shaft) ¦________¦ bottom of
1.59(40.4) servo
Top view: | ¦O¦ ¦O¦ -
case width 0.78(19.8) ¦ ¦ * ¦ ¦ - holes on-center
| ¦O¦ ¦O¦ - 0.39(10)
1.93(49)
center-to-center of holes
| Homepage | Batteries | Crystals | Flight Packs | Radio Accessories | Radio's | Receivers | Servo's | Search |