FUTS5801   Futaba   S5801 Servo Sail Winch

TECH NOTES
   This is a Sail Control Winch Servo that has proper Winching-Action with a
         Drum (rather than servo arms like other "sail winch" servos).

FEATURES: High Torque and High Speed
          BEC set-up (a 5-6 cell battery pack powers the winch and the
            receiver the same way an electronic speed control would)
          Water Resistant
          Adjustable Drum Winch Speed
          Metal Gears
          Two Ball Bearing                                                    .
          Adjustable Trimmer (adjusts speed from 2 to 6 rpms)

INCLUDES: One S5801 Sail Winch Servo
          (Futaba J Receiver Plug, On/Off Switch and Tamiya-style battery plug)
          One Drum Adjuster Plastic Screwdriver
          One Illustrated Instructions Sheet

REQUIRES: 5-6 Cell Battery w/Tamiya Connector, use DTXC2100.

SPECS:    Torque:   108.8 oz/in @ 6V -  136.1 oz/in @ 7.2V
          Servo Speed: .6 seconds/360-degrees of rotation @ 6V
                       .5 seconds/360-degrees of rotation @ 7.2V
          Drum Travel:  2 to 6 Revolutions (adjustment range)
          Drum Diameter: 30mm
          Length:        1.81" (46mm) (excluding drum and mount flanges)
          Width:         0.98" (23mm)
          Height:        1.73" (44mm)
          Weight:         2.93 oz
          Power Requirement: 6.0 - 7.2 volt nicd battery (5 - 6 cells)
          Regulator output:  6.0 volt/1.5 Amp (max) (power to the receiver)
                                            

|  Homepage  |  Batteries  |  Crystals  |  Flight Packs  |  Radio Accessories  |  Radio's  |  Receivers  |  Servo's  |   Search  |