FUTS9150   Futaba   S9150 Servo Digital Aileron

TECH NOTES
       This is the Futaba S9150 Digital Aileron Servo with J Connector.
             Designed for aileron applications on model aircraft.


FEATURES: Coreless motor.
          Digitally enhanced microprocessors cut about half the response time
            from transmitter input to servo reaction.
          Dust and water resistant-not water proof.
          Low profile aero design is especially suited for wing installations.
          Black plastic case.
          One year warranty.

INCLUDES: One S9150 Digital aileron servo 1-3/4" (44mm) diameter servo wheel,
            1-1/4" (32mm) diameter servo wheel, one six point servo wheel,
            four brass grommets, four mounting screws and two rubber mounts.

SPECS:    Speed:        0.18 sec/60 deg (based on 4.8V rating)
          Torque:       80.5 oz/in (based on 4.8V rating)
          Length:       1.87" (47.5mm)
          Width:        1.06" (27mm)
          Height:       1.00" (25.3)
          Weight:     1.87 oz (53g)
          Power Supply: 4.8 volts (Futaba does not recommend using 6 volts)

COMMENTS: S9150 Digital Servo Precautions,
           -It is best to avoid long leads and Y-harnesses especially with
            standard grade wires. If problems are encountered, consider using
            heavy duty wire such as Futaba's Heavy Duty Series or Hobbico's
            Pro Series, minimizing lead lengths, and/or removing Y-harnesses.
           -Current Drain: This digital servo is specially designed for high-
            torque or high-speed, therefore very high current drain is normal
            at startup. For ultimate performance when using this servo please
            review the following points.
              1. Radio systems with the Battery Fail Safe function have a
                 higher cut-off voltage setting which will cause shorter
                 operation time.
              2. When installing the servo, please check pushrod linkage to
                 make sure there is no binding in order to prevent excessive
                 power consumption and decrease the life of the motor and
                 battery.
            This digital servo cannot be used with the following transmitters
              (servo neutral signal: 1310us).
            CONQUEST AM, FG Series (T4FG, T5FGK,T6FG, T6FGK, T7FGK), New Terra-
              top, T3EGX, T3PGE, T2NL, T2LGX, T2FR, T2PK series.
                                   

|  Homepage  |  Batteries  |  Crystals  |  Flight Packs  |  Radio Accessories  |  Radio's  |  Receivers  |  Servo's  |   Search  |