FUTS9202   Futaba   S9202 Servo Ball Bearing Coreless Aircraft

TECH NOTES
   This is the S9202 Ball Bearing, Coreless Servo designed for Aircraft, and
helicopters.  The S9202 replaces the S9201 and has nylon gears.
Futaba products have a 1-Year Warranty for defects in materials & workmanship.

   This is not dustproof as is the S9304, thus is not suggested for cars and
      trucks. This is not a requirement for servos used in planes.

INCLUDES: One S9202 Coreless Ball Bearing Servo w/"J" connector.
          One Accessory Bag (mounting hardware and horns)

SPECS:    Length: 1.59"       Width: 0.79"       Height: 1.40"
          Torque: 55.5 oz/in @ 4.8V - 69.4 oz/in @ 6V
          Transit Time: .28 sec/60 deg @ 4.8V - .22 sec/60 deg @ 6V
          Weight: 1.76 oz


COMMENTS: A note on coreless motors.  A conventional servo motor has a steel
            core armature wrapped with wire that spins inside the magnets.
           In a coreless design, the armature uses a thin wire mesh that forms
           a cup that spins around the outside of the magnet eliminating the
           heavy steel core.  This design is much lighter resulting in smoother
           operation and faster response time.

|  Homepage  |  Batteries  |  Crystals  |  Flight Packs  |  Radio Accessories  |  Radio's  |  Receivers  |  Servo's  |   Search  |