|
Futaba |
Hobbies R Us |
Futaba |
FUTS9255 Futaba S9255 Hi-Torque Heli Digital Servo
TECH NOTES
This is the Futaba S9255 Digital High-Torque Servo
for helicopter usage.
FEATURES: Comes with heavy duty wiring that can handle higher current loads
Ball bearing output shaft
Metal gears
Coreless motor, a conventional servo motor has a steel core armature
wrapped with with wire that spins inside magnets. In a coreless
design, the armature uses a thin wire mesh that forms a cup that
spins around the outside of the magnet eliminating the heavy steel
core. This design is much lighter resulting in smoother operation
and faster response time.
High torque
One year limited warranty
INCLUDES: One Digital High Torque Servo w/Small Round Horn and 11.5" (292mm)
wire lead
Four Rectangular Grommets
Four Chrome Bushings
Four Mounting Screws
One Large Round Horn
One Six Arm Horn
One Four Arm Horn
SPECS: Speed: .17 sec/60 degrees @ 4.8V
Torque: 112oz-in @ 4.8V
Weight: 1.96 oz (56g)
Length: 1.6" (41mm)
Width: 0.8" (20mm)
Height: 1.4" (35mm)
COMMENTS: Case Set, FUTM3030
Gear Set, FUTM3463
This digital servo cannot be used with the following AM
transmitters as the servo neutral signal is: 1310us).
CONQUEST AM, FG Series (T4FG, T5FGK,T6FG, T6FGK, T7FGK), New Terra-
top, T3EGX, T3PGE, T2NL, T2LGX, T2FR, T2PK series.
***** Do not turn servo horn forcibly in the Power Off State****
***** Do not use digital servos with AM systems *****
***** For use only with NiCd packs *****
| Homepage | Batteries | Crystals | Flight Packs | Radio Accessories | Radio's | Receivers | Servo's | Search |