Futaba
Servos

Hobbies R Us

Futaba
Servos

 
 

HomePage

R/c Airplanes

R/c Boats

R/c Cars

Flight Packs

Radio's

Radio Accessories

Receivers


Click Here For Pricing & Stock Availability

FUTS9350   Futaba   S9350 Servo Digital High Torque 
TECH NOTES
            This is the S9350 Digital Servo w/Two Ball Bearings for
         Car and Boat Use and Comes with "J" Connector Pre-Installed.
     Metal case acts as a Heat Sink to reduce Heat and is designed to be
                          Water and Dust Proof.

FEATURES: Comes with Heavy Duty wiring that can handle Higher Current Loads.
          New Metal casing which helps to dissipate heat.
          Coreless Motor
          Dual Ball Bearing Output Shaft
          Metal Gears
          High Torque
          Dust and Water Proof
          Great for 1/8 Cars or Boats Where Higher Torque and Speed are Needed.
          One year warranty.

INCLUDES: One Digital High Torque Servo w/Small Round Horn
          Four Rectangular Grommets
          Four Brass Bushings
          Four Mounting Screws
          One Large Round Horn
          One Six Arm Horn
          One Four Arm Horn

SPECS:    Speed:  .12 Sec/60 Degrees (at 6.0 Volts)
          Torque: 138.8 oz/in  (at 6.0 Volts)
          Weight: 2.2 oz
          Length: 1.50"
          Width:  0.8"
          Height: 1.4"

COMMENTS: S9350 Digital Servo Precautions,
          -It is best to avoid long leads and Y-harnesses especially with
           standard grade wires.  If problems are encountered, consider using
           heavy duty wire such as Futaba's Heavy Duty Series or Hobbico's
           Pro Series ,minimizing lead lengths, and/or removing Y-harnesses.
           -Current Drain:  Futaba S9350 Servo is Specially Designed for High-
            Torque and High-Speed, Therefore Very High Current Drain Is
            Normal At Startup.  For Ultimate Performance When Using This Servo
            Please Review The Following Points.
            (1) When Using Systems With the Battery Fail Safe Function it Has
              a Higher Cut-Off Voltage Setting Which Will Cause Shorter
              Operation Time.
            (2) When Installing the Servo Please Check Pushrod Linkage To Make
              Sure There Is No Binding in Order To Prevent Excessive Power
              Consumption and Decrease the Life of the Motor and Battery.
          This Digital Servo Cannot Be Used With The Following Transmitters:
            (Servo Neutral Signal: 1310us)
            Conquest AM, FG Series (T4FG, T5FGK, T6FG, T6FGK. T7FGK), New
            Terratop, T3EGX, T3PGE, T2NL, T2LGX, T2FR, T2PK Series



|  Homepage  |  Batteries  |  Crystals  |  Flight Packs  |  Radio Accessories  |  Radio's  |  Receivers  |  Servo's  |   Search  |