GBGA1077    Tiger 1.20 ARF

TECH NOTES
       This is the radio controlled, glow powered, Almost-Ready-to-Fly,
                   Carl Goldberg Tiger 1.20 Sport Airplane
        Recommended for modelers with trainer airplane experience and
          also who have safely flown/landed .40 size low wing planes.

FEATURES: Construction: Laser cut balsa and plywood, jig built
          Wings: All wood, built up with aluminum joiner tube
          Covering: Factory applied premium iron-on, color scheme is white
            with orange, red and yellow accents, see COMMENTS
          Radio Compartment: Plywood reinforced, accessible over wing
          Canopy: Tinted
          Landing Gear: Tricycle style 0.20" (5mm) diameter wire
            pre-mounted gear blocks for easy conversion to tail dragger
          Wheels: Three foam 3.25" (82mm) diameter
          Aileron Control: Dual servo aileron and flap control
          Tail Section: Includes flying wires and pre-mounted gear blocks for
            easy conversion to optional tail-dragger configuration
          Fuel Tank: 22oz (650cc) approximate
          Engine Mount: 2-piece composite construction
          Building Time: Ready to fly in several hours

INCLUDES: Pre-built and covered wings, fuselage and tail assemblies, pushrods,
            0.20" (5mm) tricycle landing gear, 3.25" (82mm) main wheels, engine
            mount, fuel tank, wood servo trays, hardware package and photo-
            illustrated instructions

REQUIRES: Engine: .75 - 1.08 cu in (12 - 18 cc) 2-stroke
            OR  .91 - 1.20 (15 - 20 cc) 4-stroke
          Muffler: Sports-style supplied with engine, engine mounts in an
            upright position)
          Radio: 5-Channel
          Servos: 8-Standard (2-Aileron, 2-Flap, 2-Elevator, 1-Throttle,
             1-Rudder)
          6" (152mm) Servo Extensions: Two for flaps/ailerons
          18" (457mm) Servo Extension: Two for flaps/ailerons
          Y-Harness: For aileron servos
          Misc. Items: Glow plug, 1/4" foam rubber padding, medium fuel tubing,
            fuel filter, propeller, building and field equipment

SPECS:    Wingspan: 80" (2032mm)
          Wing Area: 1143 sq in (73.84 sq dm)
          Weight: 10.5 - 11.5 lb (4763 - 5216 g)
          Length: 72" (1829mm)
          Airfoil: Fully-symmetrical, low-wing configuration
          Center of Gravity: 3-7/8" (99mm) Back from the wing's leading edge
          Control Throws-          Low Rate        High Rate
            Elevator: Up & Down     3/8" (9mm)      1/2" (13mm)
            Rudder: Right to Left 1-1/2" (38mm)   1-1/2" (38mm)
            Ailerons: Up & Down     3/8" (9mm)      1/2" (13mm)

COMMENTS: The Tiger 1.20 ARF is covered in White Ultracote (#870) with True Red
            (#866), Yellow (#872) and Orange (#877) trim colors. We do not
            carry Ultracote.

ACCESSORIES
     THIS IS THE GLOW POWERED CARL GOLDBERG ARF TIGER 1.20 SPORT AIRPLANE.
FEATURES: LASER CUT BALSA & PLYWOOD, FLAPS, TRICYCLE STYLE LANDING GEAR,
 TAIL BRACING WIRES, COMPOSITE ENGINE MOUNT
REQUIRES: .75-1.08 CU IN (12-18CC) 2-STROKE OR .91-1.20 (15-20CC) ENGINE, 5+
 CHANNEL RADIO, 8 SERVOS, EXTENSIONS, Y-HARNESS, BUILDING & FIELD EQUIP.