GBGA0053   Goldberg   Ultimate 10-300 Kit .60,54"

TECH NOTES
        This is the radio controlled, glow powered, balsa and plywood
              Carl Goldberg Ultimate 10-300 Sport Biplane Kit.
                For Intermediate to Advanced Modeler/Flyers.

FEATURES: Construction: Easy interlocking balsa and light plywood, with built-
            in thrust angles.
          Wings: One-piece, balsa and plywood
          Radio compartment: Easily accessible, plywood reinforced
          Cowling: ABS plastic
          Canopy: Clear plastic
          Cockpit features: Instrument panel decal
          Landing gear: Prebent 3/16" (4.5mm) diameter wire, 1/8" (3mm)
            tail wheel wire
          Single aileron servo: Standard size, high torque
          Rudder actuation system: Pull/pull, ball bearing servo recommended
          Hardware: All fasteners, pushrods, control horns, and hinges
          Motor mount: Glass filled nylon
          Wheel pants: ABS plastic

INCLUDES: All wood to construct the airplane, pushrods, prebent 3/16" (4.5mm)
            main landing gear, 1/8" (3mm) tailwheel wire, nylon adjustable
            engine mount, hardware package, ABS plastic cowling and wheel pants
            clear canopy, decals, photo-illustrated instructions, pre-formed
            cabane assembly, full-size plans.

REQUIRES: Engine:  .60 cu in (9.8 cc) 2-stroke
              OR   .90-1.20 cu in (14.7 - 19.7 cc) 4-stroke
          Muffler: Standard muffler supplied with 2-stroke engine or optional
            Pitts type
          Radio:  Four channel
          Servos: Three standard size, high torque with at least 77oz/in torque
            and one regular torque-42oz/in for throttle
            (1-aileron, 1-elevator, 1  ball bearing-rudder, 1-throttle)
          Servo extension: One 6" (152mm) for ailerons
          Covering: Three six foot rolls
          Misc. Items: 3" (76mm) main wheels, 1-1/4" (31mm) tailwheel,
            3" (76mm) spinner, 12oz (355cc) fuel tank, 1/2" (13mm) foam rubber,
            3' (914mm) medium fuel tubing, fuel filter, propeller, building and
            field equipment.

SPECS:    Wingspan:      54" (1372mm)
          Wing Area:    980 sq in (63.31sq dm)
          Weight:         7.5 - 8.5lbs (3402 - 3855g)
          Length:        57.5" (1460mm)
          Airfoil:     Fully-Symmetrical
          Center of Gravity:  15/16" - 3" (24mm - 76mm) Back from the wing's
            leading edge at the fuselage sides
          Control Throws-Using control surface travel gauges on die sheet
            #5303
                                    Low Rate       High Rate
            Ailerons: Up & Down     10 degrees     12 degrees
            Elevator: Up & Down     12 degrees     14 degrees
            Rudder: Right & Left    15 degrees     23 degrees
          Incidence-
            Engine Right Thrust:        2 degrees
            Engine Up and Down Thrust:  0 degree
            Wings:                      0 degree
            Stabilizer:                +1-1/4 degrees

COMMENTS: The pilot shown inside the plane is not included.  Williams Brothers
            makes several styles of 1/6 scale pilot busts that fit nicely
            under the canopy.

                                                                  
ACCESSORIES
           THIS IS THE GOLDBERG ULTIMATE 10-300 BIPLANE KIT.
FEATURES: BIPLANE, SYMMETRICAL AIRFOIL, BALSA & PLY CONSTRUCTION, INSTRUMENT
  PANEL DECAL, ABS WHEEL PANTS & COWLING, CLEAR CANOPY, HARDWARE PACKAGE.
REQUIRES: .60 (9.8CC) 2 STROKE OR .90-1.20 (14.7-19.7CC) 4 STROKE ENGINE, 4CH
  4CH RADIO W/4 SERVOS, COVERING, GLUE, TOOLS, PROP, SPINNER, WHEELS.

|  Homepage  |  ARF  Planes  |  Electric  |  Kits  |  Park Flyers  |  Sailplanes  |  Search  |